Table of Contents
Advertisement
26
Alternatively, you can proceed as follows:
• Click the pictogram on the right side of the taskbar.
• Select Graphics Options from the menu bar.
• Under Output To, select "Intel
"Notebook + Monitor."
• Double click the program icon Save Configurations on the Windows
desktop to save the changed configuration. The device will then restart.
Please always switch on the external monitor before turning on
the i.Profiler
Connecting the i.Profiler
with DHCP
•
Connect the i.Profiler
network cable.
•
After starting the i.Profiler
Power down window to switch to the Windows desktop
(Administrator rights required).
•
Double click on the Network Configurator pictogram on the
desktop. The Network Configuration Tool window opens.
•
select the Ethernet connection you are using in the Network
Adapter field. The left connection is designated with [00000000],
and the right with [00000001].
•
Select Activate DHCP.
•
Press the Change IP button. The message "Change to DHCP was
successful." appears.
•
Close the Network Configurator.
•
Double click the program icon Save Configurations on the Windows
desktop to save the completed configurations. The device will then
restart.
EN 20_070_0009I v1.5
Installation
®
Dual Display Clone" and then
plus
so it can be better detected during booting.
plus
plus
to the practice network (LAN) using a
, use the Close application button in the
plus
to an existing network
Advertisement
Table of Contents
