Ruijie RG-AP680-O Instruction Manual page 11

Software Specifications
CAPWAP
Data forwarding
Wireless roaming
Wireless locating
Security and Authentication
Authentication and encryption
Data frame filtering
WIDS
ACL
CPP
NFPP
Routing and Switching
MAC
Ethernet
IPv4/IPv6 CAPWAP
Layer 2 and Layer 3 topology between an AP and an AC
An AP can automatically discover the accessible AC.
An AP can be automatically upgraded through the AC.
An AP can automatically download the configuration file from the AC.
CAPWAP through NAT
Centralized and local forwarding
Layer 2 and Layer 3 roaming
MU and TAG device locating
Remote Authentication Dial-In User Service (RADIUS)
PSK and web authentication
QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication
Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES)
Allowlist, static blocklist, and dynamic blocklist
Rogue device discovery
Optimization of rogue AP containment for all STA types
Fuzzy containment
SSID-based blocklist
DDoS attack identification
Automatic detection of STA attacks, and adding STAs to the blocklist when ICMP attacks or TCP SYN
attacks are detected
STA isolation
IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL
IPv6 ACL
Time range-based ACL
ACL based on a Layer 2 interface
ACL based on a Layer 3 interface
Ingress ACL based on a wireless interface
Dynamic ACL assignment based on 802.1X authentication (used with the AC)
CPU Protect Policy (CPP)
Network Foundation Protection Policy (NFPP)
Static and filtered MAC addresses
MAC address table size: 1,024
Max. number of static MAC addresses: 1,024
Max. number of filtered MAC addresses: 1,024
Jumbo frame length: 1,518
Ethernet II
1000M SFP ports modules
2.5G ports
RG-AP680-O(V3)
-10-