Laser Safety; Installation Environment Requirements; Bearing Requirements; Ventilation Requirements - Ruijie Reyee RAP6260-D Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
in case of accidents.

Check the access point carefully before shutting down the power supply.

Keep the access point far away from grounding or lightning protection devices for power device.

Keep the access point far away from radio stations, radar stations, high-frequency high-current devices, and
microwave ovens.

Laser Safety

The SFP transceiver (optional accessory) is a class A laser product.

When an SFP transceiver works, ensure that the port has been connected with a fiber-optic cable or sealed
by a plug to keep out dust and prevent it from hurting your eyes.

Do not look into any fiber port.
Note

Do not approach or look into any fiber port under any circumstances, as this may cause permanent
damage to your eyes.
2.2

Installation Environment Requirements

For normal operation and prolonged service life of the access point, the installation site must meet the following
requirements:

Bearing Requirements

Evaluate the weight of the access point and its accessories, and ensure that the installation site (wall or pole)
can bear the weight.

Ventilation Requirements

The access point adopts natural cooling. Reserve a sufficient clearance around the access point to ensure
proper ventilation.

Temperature/Humidity Requirements

To ensure the normal operation and prolonged service life of the access point, maintain an appropriate
temperature and humidity. Working in an environment with too high or too low temperature and humidity for a
long period may damage the access point.

In an environment with high relative humidity, the insulating material may have poor insulation or even leak
electricity. Sometimes it is also prone to changes in the mechanical properties and causes rusting of metal
parts.

In an environment with low relative humidity, static electricity is prone to occur and damage the internal
circuits of the access point.

A high temperature can accelerate the aging process of insulation materials, greatly reducing the reliability
of the access point and severely affecting its service life.

Before using the GE SFP transceiver (Mini-GBIC module), make sure that the ambient temperature meets
the requirement.
10
Preparing for Installation