Table of Contents
Advertisement
- You can still press SPEED+/- or INCLINE+/- to change the speed and incline during each program.
- Once the program is completed it will beep 3 times.
- Press the START button, treadmill will run after 3 seconds.
- Press SPEED+/- to adjust the speed.
- Press INCLINE+/- to adjust the incline.
8.2 Body Fat Test: From standby mode, press PROG button until you get to FAT.
- Press Mode button to enter information.
Set value with SPEED+/- from F-1 to F-4 (F-1 GENDER, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT)
- Press Mode button to enter F-5 (F—5 BODY FAT TEST), hold hands on the hand pulse sensor, the
console will display your body fat value after 3 seconds.
- The body fat value is intended as a guide only, and is not medical data.
F-1
F-2
F-3
F-4
F-5
HANDPULSE FUNCTION:
Hold on the pulse sensor for about 5 seconds, the screen will show user's pulse value. This data is just
for reference and cannot be regarded as medical data.
LUBRICATION REMINDER FUNCTION:
This machine has lubrication reminder function. After every total running distance of 300km, the
treadmill screen will remind with lubrication. Please read the user's manual first.
ENERGY SAVING FUNCTION:
To reduce energy consumption, this treadmill will enter sleeping mode if it is without any operation for
10 minutes. The screen will give reminders before entering sleep mode. Once the machine enters sleep
mode, please take off safety key and insert again to awaken the system.
l
POWER ON (
) AND POWER OFF (
Switch off the power: You can switch off the power to stop the treadmill, this will not cause a problem to
the machine.
Gender
Age
Height
Weight
FAT
FAT
FAT
FAT
O
)
01 Male
10-99
100-200cm
20-150kg
≤19
= (20---25)
= (26---29)
≥30
OPERATION GUIDE |
02 Female
Under Weight
Normal Weight
Overweight
Obesity
19
Advertisement
Table of Contents
