Information For The User - Digigram IQOYA X/LINK-MPX User Manual

INFORMATION FOR THE USER

"This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense."
Warning
This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
User safety
European Directive 2014/35/UE "Low Voltage Directive
Europe: EN 62368-1 (2014)
International: IEC 62368-1 (2014)
RoHS
European directive 2011/65/EU aka "RoHS"
CAN ICES-3 (A) / NMB-3 (A)
EMC
European Directive: EMC 2014/30/UE
Radio disturbance :
International : CISPR32 (2015+AMD1/2019) Class A
European : EN55032 (2015+A1&A11/2020) Requirements for Information
Technology Equipment (ITE)
Immunity: International : CISPR35 (2016)
IEC 61000-6-2 (2016)
European : EN55035 (2017+A11/2020) (ITE)
EN 61000-6-2 (2019)
Harmonics: International : IEC 61000-3-2 (2018+A1:2020)
European : EN 61000-3-2 (2019)
Voltage changes : International : IEC 61000-3-3 (2013+A1:2017+A2:2021)
European : EN 61000-3-3 (2014+A1/2019)
United States: CFR 47, FCC Part 15, Subpart A (Class A Digital Device) & Industry
Canada ICES-003 (Issue 7 – 2020)
Note: to comply with standard EN55035, use shielded network cables!
IQOYA X/LINK-MPX user manual
7