Table of Contents
Advertisement
To view the content of a program, click on
The decoding priorities of the program are displayed as well as some associated information:
●
Name: program name
●
Priority: 1, 2, or 3 priorities are displayed, depending on what has been defined.
●
Source: displays the name of the audio source defined for the priority
●
Program status: Displays the status of the program, and the status of each priority.
Possible program statuses are:
- Green LED => the first enabled priority is decoded.
- Orange LED => the source of a priority is missing
- Red LED => all the defined sources are missing.
Possible priority statuses are:
-
Playing:
IQOYA is playing this priority
- Missing: the audio source of the priority is missing
- Disable: the decoding priority is disabled
- Available: means that the source of this priority is detected, but a higher priority source is being played.
●
Audio format: displays the audio format of the decoded IP service.
●
First output: displays the first output used for the program
●
Serial: displays the serial port that outputs tunneled serial data.
●
GPOs: displays the GPO that reflect the tunneled statuses
on the left of its name.
IQOYA X/LINK-MPX user manual
63
Advertisement
Table of Contents
