Preferences −> Auxiliary Data −> Serial Port - Digigram IQOYA X/LINK-MPX User Manual

9.1.1.4.1 Preferences −> Auxiliary data −> Serial port
This page allows for enabling/disabling the RS232 port, and for setting its configuration.
To modify the parameters of a COM port, click on its
Parameter
Device name
Data transmission mode
Baud rate
Data bits
Stop bits
Parity
Status
Click on "Save" to confirm the changes.
Type
Read
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
IQOYA X/LINK-MPX user manual
icon on the left column.
Description
Name of the RS232 port
Defines the way serial data are inserted into the IP audio stream.
Generic: serial data are inserted as they arrive.
UECP: serial data are inserted each time a complete RDS UECP frame is fully
received from the RS232 port.
Serial port baud rate in bits/s, from 1200 bps to 40 Kbits/s
Select the number of bits for each character (6, 7 or 8)
Enter the number of bits used to signal the end of a character: 1 or 2.
Select the method used for detecting errors on the RS232 port transmission:
● None: No
● Odd: number of bits of each character (including the parity bit) is always odd.
● Even: number of bits of each character (including the parity bit) is always
even.
Enable: the COM port is enabled.
Disable: the COM port is disabled.
37