Digigram IQOYA X/LINK-MPX User Manual page 50

Case of an audio program or uncompressed MPX program
The RTP protocol is to be used for streaming.
Parameter
Program
Name
Data tunnelling (This section is displayed only if tunnelling has been activated from Preferences->Auxiliary data->GPIO).
Auxiliary data
GPIs
Audio stream
IP address or Domain name
Port
Type Description
Read/Write Select the Program to be streamed from the list of Programs.
Read/Write If there is a serial port hardware option installed, select the serial port that provides the serial
data to be tunnelled in-band.
Read/Write If there is a GPIO hardware option installed, enter a list of GPI numbers whose status is to be
tunnelled in-band. Numbers start from 1 and must be separated by commas
Read/Write Destination IP address (unicast or multicast) or domain name.
Read/Write Enter the destination UDP port.
IQOYA X/LINK-MPX user manual
50