Receive −> Programs - Digigram IQOYA X/LINK-MPX User Manual

In case the audio format of the RTP IP stream is not signalled in-band, it is necessary to declare if the received IP service
includes an FEC (this is not valid for microMPX streams).
Select the appropriate FEC for the field "Type " as shown below. The payload type is set automatically.
In case FEC is not sent on the default UDP port and IP address, select "Yes" in the " Advanced mode" field, to be able to
enter the IP address and UDP port.
FEC stream parameters
Type
Payload type
Advanced mode
IP address
Listening port
Click on "Save" to confirm the settings.
9.1.4.2 Receive −> Programs
Output programs are composed of a list of audio sources organised by priorities. Up to 3 decoding priorities can be defined.
The highest priority is priority 1. If the audio source of priority 1 is lost, IQOYA switches to priority 2 if the corresponding audio
source is available, or to priority 3 if the corresponding audio source is available. If no declared audio source is available, the
program output is silent.
Type Description
Read/Write Select the FEC that is configured on the encoder of the received IP stream.
Read/Write Enter the same FEC payload type that is configured on the encoder of the received IP
stream.
Read/Write Select "Yes" if the FEC destination IP address is not the same as the IP stream destination
IP address, or of it is to be received on a UDP port different from "IP stream UDP port +2"
Read/Write Displayed if Advanced mode is set to "Yes".
In unicast, set the IP address to 127.0.0.1.
In multicast, enter the multicast IP address.
Read/Write Displayed if Advanced mode is set to "Yes".
Enter the UDP port for receiving the FEC.
IQOYA X/LINK-MPX user manual
56