Status; Managing Backup Files And Playlists Via Ftp - Digigram IQOYA X/LINK-MPX User Manual

Mpx over ip codec
Hide thumbs Also See for IQOYA X/LINK-MPX:
Table of Contents

Advertisement

Duplicated packets
Reordered packets
Recovered packets

9.1.5 Status

The status page displays a synthesis of the statuses of sent IP Services and output programs, and gives access to all the
alarms of each IP service and output program.
This page is accessible by clicking on the icon
All sent IP services are listed on the left under "Send".
All output programs are listed on the right under "Receive".
The parameter "Status filter" allows filtering on the type of alarms to take into account for the display. Possible values are:
All: all alarms are taken into account.
Green LED means no alarm is ON.
Orange LED means there are warnings ON.
Red LED means there are alarms and the stream is stopped.
Warnings: only the warnings are taken into account. They concern the receivers.
Failures: only failures are taken into account; this is typically when there is a streaming failure (no stream received,
no stream sent).
A list of all the alarms can be displayed by clicking on the IP Service name (Send), and on the output program name
(Receive).

10 Managing backup files and playlists via FTP

Local sound files and playlists on the SDHC card can be uploaded and removed via FTP.
Connect to IQOYA X/LINK via an FTP software application. Login is as follows:
username: ftp
password: iqoya
These are the default username and password. Note that the username and password may be changed.
Playlists (.m3u) and sound files must be stored in folder "SDCARD".
Number of IP frames that are received more than once. IQOYA automatically removes duplicated
frames.
Number of IP frames that have been reordered after being received disordered.
Number of IP frames that are recovered thanks to the FEC.
If "Lost packets - Recovered packets" equals 0, the FEC is adapted to the network path.
If "Lost packets > Recovered packets", the selected FEC does not allow to recover all the lost packets. It
is then necessary to select another FEC.
Also make sure that the jitter value set in Receive−> IP services is higher than the max measured jitter.
.
IQOYA X/LINK-MPX user manual
65

Advertisement

Table of Contents
loading

Table of Contents