Table of Contents
Advertisement
Output programs configuration is accessible either from the left column
to programs" on the top right of the IP Services
The "Programs" page displays the declared output programs.
To declare a new output program, click on
the left of the program.
Program Parameter
Program name
Disabled
Audio outputs
MPX
First analog channel
Number of channels
Type
Description
Read/Write
Name given to this output Program.
Read/Write
Set this parameter to "Yes" if you want to disable the program. This means that IQOYA
does not process it.
Set this parameter to "No" so that IQOYA processes this program and decodes audio.
Read/Write
Select "Yes'' if an MPX signal is to be decoded. It is then played to all the MPX outputs
(MPX AES192, MPX analog out 1, MPX analog out 2).
Select "No" for decoding an IP audio stream to the analog outputs.
Read/Write
Select the first analog output the decoded audio signal is to be sent to.
Read/Write
Select mono or stereo.
IQOYA X/LINK-MPX user manual
.
, or create it from an existing one by selecting the icon
, or directly from the icon "GO
on
57
Advertisement
Table of Contents
