Table of Contents
Advertisement
Disabled
Digital Level (dB)
Input channel mapping
PLL
Data tunneling: Auxiliary data
Routing of tunneled status data:
Status data indexes
Routing of tunneled status data:
GPO inversion mask
Silence detection parameters for the decoding priority
Read/Write
Set this parameter to "Yes" to disable this decoding priority. Disabling a defined priority is useful
when some servicing is in progress on it (network servicing, servicing on the source of the IP
stream). The priority can then be enabled when servicing operations are finished.
Read/Write
Digital gain applied to the samples on this priority. Adjustable by steps of 0.01dB.
Read/Write
Not displayed for µMPX.
Displayed when the audio source includes more audio channels than the output.
This should not appear for an MPX output program (mono IP stream, mono output).
Select how the channels of the selected source are to be processed:
●
No: each input channel is assigned to an output channel.
●
Mix: the input channels are mixed to a single output channel. An attenuation of -6 dB is
applied to each channel before they are mixed. The gain/attenuation set through
"Digital level" comes in addition to this attenuation.
●
First channel only: only the first channel is processed.
●
Second channel only: only the second channel is processed.
Read/Write
To be set to "Yes" in most of the use cases. It allows synchronisation of the incoming stream to
the internal clock, thus guaranteeing a constant latency with the encoder.
Has to be set to "No" typically when AES transparency is required between the encoder and the
decoder (this requires also that the encoder and the decoder use clocks that have the same
frequency).
Read/Write
In case serial data are tunneled in-band, select the output port. It can be the RS232 COM port,
or a UDP port if it has been declared from the menu "Preferences/Auxiliary data/UDP".
Read/Write
Enter the GPO number (starting from 1) that will reflect the tunneled GPI status.
Click on "Add tunneled GPI" to route another tunneled status.
Read/Write
Check the box under a GPO so that it reflects the inverted status of the tunneled GPI.
IQOYA X/LINK-MPX user manual
60
Advertisement
Table of Contents
