Digigram IQOYA X/LINK-MPX User Manual page 42

Displayed VU-meters unit is dBFS.
Select "Unlock faders" to change the input gains.
The faders allow adjusting the input gain by steps of 0.01 dB.
● If the first channel type is "'Analog Line Audio", left and right input gains can be calibrated for audio signals up to +24
dBu. When the slider is set to +24 dBu, a +24 dBu input signal leads to 0 dBfs after digitization.
● If the first channel type is "MPX AES192" or "MPX AES192+SRC" , the left gain can be adjusted from -15 dB up to
+15 dB.
● For the two analog MPX inputs, input gains can be calibrated for MPX signals up to +15 dBu.When the slider is set
to +15 dBu, a +15 dBu input signal leads to 0 dBfs after digitization.
All gains adjustments are in steps of 0.01dB.
Input signals can be muted/unmuted by selecting "Mute/Unmute" below each fader.
VU-meters settings
Click on the "Settings" button to adjust the bar graph display and the front panel LED VU-meters display (red zone, orange
zone, and green zone).
IQOYA X/LINK-MPX user manual
Peak duration window: duration of the display of the peak levels (from 20ms to
10000ms)
Peak: Level value in dBFS above which the vu-meter is red
Headroom: Level value in dBFS above which the vu-meter is orange.
Nominal 1: Level value in dBFS above which the LED right below the headroom
LED is highlighted in green.
Nominal 2: Level value in dBFS above which the 3rd LED from the bottom is
highlighted in green.
Nominal 3: Level value in dBFS above which the 2nd LED from the bottom is
highlighted in green.
Nominal 4 :Level value in dBFS above which the 1st LED from the bottom is
highlighted in green.
42