Table of Contents
Advertisement
General Purpose Outputs (GPOs)
The IQOYA X/LINK GPO's are opto-isolated SPDT type relays (Single Pole, Double Throw).
Each GPO features 3 pins:
●
COM : Common
●
N.C. : normally closed
●
N.O. : normally open
According to the status applied to the GPO, pin N.C. is connected to pin COM, or pin N.O. is connected to pin COM.
GPIO tunneling in direct mode (status not inverted)
When GPI tunneling is enabled, an open GPI (pin K not connected to the ground) is reflected on the distant GPO by pin N.O
connected to pin COM.
GPIO tunneling in inverted mode (status inverted)
An "open" GPI (pin K not connected to the ground) is reflected on the distant GPO by pin N.O connected to pin COM. Pin
N.C is left unconnected.
A "closed" GPI (pin K connected to the ground) is reflected on the distant GPO by pin N.C. connected to pin COM. Pin N.O is
left unconnected.
Alarms notification
Alarms can also be notified on GPOs. See chapter "Alarms management".
GPO relay specifications
Maximum power switching capability
Maximum switching current
Maximum carrying current
Maximum switching voltage
Typical life expectancy (switching max
power)
*
Note: The maximum voltage makes it possible to control devices (up to 60 W. max) directly through the
power outlet.
60 W/62.5 VA
5 A
DC
2 A
DC
220 V
DC
250 V
*
AC
125 V
AC
30 V
/2 A-60 W
DC
6
10
operations
IQOYA X/LINK-MPX user manual
/0.24A-60 W
/0.25-62.5 V
AC
/0.5A-62.5 V
AC
70
Advertisement
Table of Contents
