Table of Contents
Advertisement
Auto maintenance settings
This setting item is displayed by tapping Device settings after tapping
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
• Auto nozzle check
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
• Nozzle check error display
Enables/Disables displaying the nozzle check error.
• System cleaning frequency
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select Short if you use the printer at a higher place.
• Print pattern after new head
Selects whether you print an adjustment pattern after replacing the Print head.
163
(Setup) on the HOME
Advertisement
Table of Contents
Troubleshooting
