Table of Contents
Advertisement
A confirmation message will appear when the process is finished.
Important
• Do not remove the maintenance cartridge except when the message indicating replacement is
displayed.
If you remove the maintenance cartridge while ink is being removed, the ink may leak out.
10. Press ON button and turn off printer.
Packing Printer
1. Disconnect power cord and interface cable.
Important
• Turn off the printer before you unplug it. Unplugging the printer before it is off and moving it may
damage the printer. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks,
and follow this procedure again.
2. Tape down printer covers to secure them, in the reverse order of tape removal during
installation.
3. Remove the stand by reversing the installation procedure, when it was attached to the
printer.
4. Disassemble and repackage the stand by following the installation procedure in reverse.
5. Repack roll holder, holder stopper, and printer in shipping materials, and then package
them in shipping box.
435
Advertisement
Table of Contents
Troubleshooting
