Canon TA-30 Online Manual page 625

Hide thumbs Also See for TA-30:

Table of Contents

Select when cut is not smooth with Standard settings.

Select when there are no particular problems with auto-cut.

If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and it will

slow deterioration of the cutter's capabilities.

Unidirectional Printing

Controls color unevenness and unaligned ruled lines.

Please check when printing in one direction.

Select whether to print reflected image or not. When box is checked and turned on, text and images

will be printed as if reflected in a mirror.

Custom dialog box

Set the quality level, and select the desired print quality.

You can use the slider bar to adjust the print quality level.

• Certain print quality levels cannot be selected depending on the settings of Media Type.

• The High, Standard, or Fast print quality modes are linked with the slider bar. Therefore when

the slider bar is moved, the corresponding quality and value are displayed on the left. This is the

same as when the corresponding radio button is selected for Print Quality on the Main tab.

View Settings dialog box

Print Target

Select the print purpose. The settings of the selected print purpose are displayed in Details.

Displays the name of the selected print purpose.

Displays the settings of the print purpose that was selected for Print Target.

Color Settings dialog box

Color Adjustment Tab

This tab allows you to adjust the color balance by changing the settings of the Cyan, Magenta, Yellow,

Tone, Brightness, and Contrast options.

Troubleshooting