Page 1 TR7500 series Online Manual Basic Operation Network Maintenance Overview of the Machine Information about Paper Printing Copying Scanning Faxing Frequently Asked Questions List of Support Code for Error English...
Page 2: Table Of Contents
Contents Using Online Manual..........10 Symbols Used in This Document.
Page 3 Checking Ink Status on the Touch Screen..........88 Ink Tips.
Page 4 Operation Panel............. . . 147 Power Supply.
Page 5 Printing from Computer........... 204 Printing from Application Software (AirPrint).
Page 6 Registering Recipients........... 273 Registering Recipients Using Operation Panel of Printer.
Page 7 Network Communication Problems......... Cannot Find Printer on Network.
Page 8 Scanning Problems..............386 Scanner Does Not Work.
Page 9 1003..............439 1200.
Page 10: Using Online Manual
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual...
Page 11: Symbols Used In This Document
Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment.
Page 12: Touch-Enabled Device Users (Windows)
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold."...
Page 13: Trademarks And Licenses
Adobe Systems Incorporated in the United States and/or other countries. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. • Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
Page 14 Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
Page 15 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3.
Page 16 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Page 17 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 18 Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 19 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----- Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications.
Page 20 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 21 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 22 MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 23 * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 24: Basic Operation
Basic Operation Printing Photos from a Computer Printing Photos from a Smartphone/Tablet Copying Faxing...
Page 25: Printing Photos From A Computer
Printing Photos from a Computer This section describes how to print photos with My Image Garden. 1. Open the rear tray cover (A) and then pull up the paper support (B). 2. Open the feed slot cover (C). 3. Load paper vertically WITH THE PRINT SIDE FACING UP. 4.
Page 26 5. Close the feed slot cover (E) gently. After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.
Page 27 7. Open the operation panel (F), pull out the paper output tray (G) and paper output support (H), and open the output tray extension (I). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing.
Page 28 10. Click the folder (L) with photos you want to print. 11. Click the photos (M) you want to print. For Windows: To select two or more photos at a time, click photos while pressing the Ctrl key. For Mac OS: To select two or more photos at a time, click photos while pressing the command key.
Page 29 For Mac OS: Specify the number of copies. 14. Start printing. For Windows: Click Print. For Mac OS: Click Print. When the Print dialog starts, specify your printer name, paper size, etc., then click Print. Note • My Image Garden lets you use images on your computer, such as photos taken with a digital camera, in a number of ways.
Page 30: Printing Photos From A Smartphone/Tablet
Printing Photos from a Smartphone/Tablet This section describes how to print photos with Canon PRINT Inkjet/SELPHY. For details on how to download Canon PRINT Inkjet/SELPHY, see below. Print Easily from a Smartphone or Tablet with Canon PRINT Inkjet/SELPHY 1. Open the rear tray cover (A) and then pull up the paper support (B).
Page 31 5. Close the feed slot cover (E) gently. After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the LCD. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.
Page 32 8. Start (Canon PRINT Inkjet/SELPHY) from your smartphone/tablet. 9. Select Photo Print on Canon PRINT Inkjet/SELPHY. The list of photos saved on your smartphone/tablet is displayed. 10. Select a photo. You can also select multiple photos at once.
Page 33: Copying
Copying This section describes how to load originals and copy them to plain paper loaded in the cassette. 1. Pull out the cassette (A) from the printer. 2. Remove the cassette cover (B). 3. To load A4 sized paper in the cassette, press down the lock (C) on the cassette, then extend the cassette.
Page 34 Important • Do not extend the cassette when loading other than A4 sized paper in the cassette. 4. Load the paper stack WITH THE PRINT SIDE FACING DOWN. 5. Align the paper guides (D) with the paper length and width. 6.
Page 35 After inserting the cassette into the printer, the paper information registration screen for the cassette is displayed on the touch screen. 7. Select the size of the loaded paper in the cassette at Page size, and then select Register. 8. Open the operation panel (E), pull out the paper output tray (F) and paper output support (G), and open the output tray extension (H).
Page 36 9. Press the HOME button (I). 10. Select Copy (J). 11. Select Standard copy. 12. Open the document cover (K). 13. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (L).
Page 37 14. Close the document cover. 15. Confirm the paper settings, then press the Black button (M) or Color button (N). Important • Do not open the document cover until copying is complete. Note • Your printer is equipped with many other convenient copy features. Copying...
Page 38: Faxing
Faxing Fax multiple documents in black and white as follows. 1. Open the document tray (A). 2. Insert the document WITH THE SIDE TO SCAN FACING UP. 3. Adjust the document guide (B). 4. Press the HOME button (C). 5. Select Copy (D).
Page 39 6. Select Enter the number (E). 7. Enter the fax number (F) and select OK (G). 8. Press the Black button (H). Note • Many other convenient faxing features are available. Faxing...
Page 40: Network
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦...
Page 41 Changing Wireless LAN Connection Method Changing Connection Mode • To add computer/smartphone/tablet to the printer: Connecting to Another Computer via LAN/Changing from USB to LAN Connection • To use Wireless Direct temporarily: Printing/Scanning with Wireless Direct IJ Network Device Setup Utility IJ Network Device Setup Utility checks or diagnoses the settings of the printer and those of computer and restores the status of them if anything is wrong with network connection.
Page 42: Restrictions
Restrictions When connecting another device while a device (such as a smartphone) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connect via wireless router •...
Page 43 • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again. •...
Page 44: Network Connection Tips
Network Connection Tips Default Network Settings Another Printer Found with Same Name Connecting to Another Computer via LAN/Changing from USB to LAN Connection Printing Network Settings Changing Wireless LAN Connection Method...
Page 45: Default Network Settings
Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 minutes Enable/disable Bonjour Enable Service name Canon TR7500 series LPR protocol setting Enable RAW protocol Enable LLMNR Active PictBridge communication Enable ("XX" represents alphanumeric characters.) * Default value depends on printer. To check value, use operation panel.
Page 46 *1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.) *2 The password is specified automatically when the printer is turned on for the first time.
Page 47: Another Printer Found With Same Name
Another Printer Found with Same Name When the printer is found during setup, other printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results.
Page 48: Connecting To Another Computer Via Lan/Changing From Usb To Lan Connection
Connecting to Another Computer via LAN/Changing from USB to LAN Connection For Windows: For Mac OS: For Windows: To add a computer to connect to the printer on a LAN or to change from USB to LAN connection, perform setup using the Setup CD-ROM or from the web page. For Mac OS: To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, perform setup from the web page.
Page 49: Printing Network Settings
Printing Network Settings Use the operation panel to print the printer's current network settings. Important • The network settings printout contains important information about your network. Handle it with care. Make sure printer is turned on. Load three sheets of A4 or Letter-sized plain paper. 3.
Page 50 Result Codes Result codes XXXXXXXX Result Code Details Result code details http://canon.com/ijnwt Wireless LAN Wireless LAN Enable/Disable Infrastructure Infrastructure Enable/Disable 3-2-1 Signal Strength Signal strength 0 to 100 [%] 3-2-2 Link Quality Link quality 0 to 100 [%] 3-2-3 Frequency...
Page 51 3-2-22 Stateless Address3 Stateless address 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-23 Stateless Prefix Stateless prefix length Length3 3-2-24 Stateless Address4 Stateless address 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-25 Stateless Prefix Stateless prefix length Length4 3-2-26 Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-27 Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX...
Page 52 3-3-13 Link Local Address Link local address XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-3-14 Link Local Prefix Link local prefix length XXX Length 3-3-15 IPsec IPsec setting Active 3-3-16 Security Protocol Security method – Other Settings Other settings – Printer Name Printer name Printer name (Up to 15 alphanumeric characters) WSD Printing WSD printing setting Enable/Disable...
Page 53 Bluetooth Bluetooth settings ― Bluetooth Setting Bluetooth Enable/Disable Bluetooth PIN Code Bluetooth PIN code XXXXXXXX Bluetooth Device Ad- Bluetooth device ad- XXXXXXXX dress dress of the printer Peer Device Address Device address of XXXXXXXX paired device Bluetooth Device Bluetooth device XXXXXXXX Name name of the printer...
Page 54: Changing Wireless Lan Connection Method
Changing Wireless LAN Connection Method Follow either procedure below to change wireless LAN connection method (infrastructure or Wireless Direct). • For Windows: ◦ Redo setup using the Setup CD-ROM or from the web page. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important •...
Page 55: Handling Paper, Originals, Ink Tanks, Etc
Handling Paper, Originals, Ink Tanks, etc. Loading Paper Loading Originals Replacing Ink Tanks...
Page 56: Loading Paper
Loading Paper Paper Sources Loading Paper in the Rear Tray Loading Paper in the Cassette Loading Envelopes...
Page 57: Paper Sources
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). You can load all supported paper on the rear tray. Supported Media Types You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note •...
Page 58: Loading Paper In The Rear Tray
For details on the Canon genuine paper, see Supported Media Types. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 59 2. Open the feed slot cover (C). 3. Slide the paper guides to open them, and load the paper in the center of the rear tray WITH THE PRINT SIDE FACING UP. 4. Slide the paper guides (D) to align them with both sides of the paper stack. Do not slide the paper guides too hard against the paper.
Page 60 Important • Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause paper jams. Note • Do not load sheets of paper higher than the load limit mark (G). 5. Close the feed slot cover (H) gently. Important •...
Page 61 After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.
Page 62 Note • When printing, select the size and type of the loaded paper on the print settings screen of the operation panel or the computer. • There are various types of paper, such as paper with a special surface coating for printing photos at optimal quality and paper suitable for documents.
Page 63: Loading Paper In The Cassette
Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 64 3. Remove the cassette cover (B). 4. To load A4 sized paper in the cassette, press down the lock (C) on the cassette, then extend the cassette. Important • Do not extend the cassette when loading other than A4 sized paper in the cassette. 5.
Page 65 6. Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of the cassette. Important • Always load paper in the portrait orientation (F). Loading paper in the landscape orientation (G) can cause paper jams. Note •...
Page 66 7. Align the paper guide (I) in front with the paper stack. Align the paper guide (I) with where it clicks into place. 8. Slide the paper guide (J) on the right to align with the paper stack. Do not slide the paper guide too hard against the paper. The paper may not be fed properly. Note •...
Page 67 11. Open the operation panel (M), pull out the paper output tray (N) and paper output support (O), and open the output tray extension (P). Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing.
Page 68: Loading Envelopes
Loading Envelopes You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a PictBridge (Wireless LAN) compliant device is not supported.
Page 69 2. Open the feed slot cover (C). 3. Slide the paper guides (D) to open them, and load the envelopes in the center of the rear tray WITH THE PRINT SIDE FACING UP. Fold flap of the envelope and load the envelope in the portrait orientation with the address side facing up. Up to 10 envelopes can be loaded at once.
Page 70 Note • Do not load envelopes higher than the load limit mark (E). 5. Close the feed slot cover (F) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
Page 71 After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the touch screen. 6. Select the size and type of the loaded envelopes in the rear tray at Page size and Type, and then select Register.
Page 72: Loading Originals
Loading Originals Where to Load Originals Loading Originals on the Platen Glass Loading Documents in the ADF (Auto Document Feeder) Loading Based on Use Supported Originals...
Page 73: Where To Load Originals
Where to Load Originals The printer has two positions to load originals: platen glass and ADF (Auto Document Feeder). Select the position to load the original according to the size, type, or usage. Note • For details on the supported originals, see below. Supported Originals Loading Documents, Photos, or Book on the platen glass Loading Two or More Sheets of Document of the Same Size and Thickness...
Page 74: Loading Originals On The Platen Glass
Loading Originals on the Platen Glass 1. Open the document cover. 2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass. Loading Based on Use Important • Be sure to observe the following when loading the original on the platen glass. •...
Page 75 Important • After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan.
Page 76: Loading Documents In The Adf (Auto Document Feeder)
Loading Documents in the ADF (Auto Document Feeder) Note • To scan a document at optimum quality, load it on the platen glass. 1. Make sure that any original has been removed from the platen glass. 2. Open the document tray. 3.
Page 77: Loading Based On Use
Loading Based on Use Load the original in the correct position on the platen glass according to the function to use. If you do not load the original correctly, it may not be scanned properly. Originals Function How to Load Copying or Faxing Scanning by detecting the type and size of the original automatically...
Page 78 Scanning from Computer (AirPrint) Loading the Original to Be Aligned with the alignment mark Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass and align it with the alignment mark . Portions placed on the diagonally striped area cannot be scanned. Important •...
Page 79 Loading Two or More Originals on the platen glass Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 inches (1 cm) or more space between the edges (diagonally striped area) of the platen glass and the originals, and between the originals.
Page 80: Supported Originals
Supported Originals platen glass Item Details Types of originals - Text document, magazine, or newspaper - Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) - Documents that are not suitable for the ADF Size (width x height) Max. 8.5 x 11.7 inches (216 x 297 mm) Quantity One or more sheets* Thickness...
Page 81 • Documents on coated paper • Documents on onion skin or other thin paper • Photos or excessively thick documents...
Page 82: Replacing Ink Tanks
Replacing Ink Tanks Replacing Ink Tanks Checking Ink Status on the Touch Screen Ink Tips...
Page 83: Replacing Ink Tanks
Replacing Ink Tanks When remaining ink cautions or errors occur, the message will appear on the touch screen to inform you of the error. In this state, the printer cannot print or scan. Take appropriate action according to the message. An Error Occurs Note •...
Page 84 Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables.
Page 85 6. Lift up the tab on the orange protective cap (E) to remove it off GENTLY. Important • Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air hole (D) blocked, ink may splash.
Page 86 8. Press on the top of the ink tank until the ink tank snaps firmly into place. Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder.
Page 87 Note • If the error message appears after the scanning unit / cover is closed, take appropriate action. An Error Occurs • When you start printing after replacing the ink tank, the printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head.
Page 88: Checking Ink Status On The Touch Screen
Checking Ink Status on the Touch Screen 1. Make sure that the power is turned on, and display the HOME screen. If the HOME screen is not displayed, press the HOME button to display it. 2. Select Setup on the HOME screen. Using the Operation Panel The setup menu screen will appear.
Page 89: Ink Tips
Ink may be used for purposes other than printing. When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink.
Page 90: Maintenance
Maintenance If Printing Is Faint or Uneven Performing Maintenance Functions from Your Computer (Windows) Performing Maintenance Functions from Your Computer (Mac OS) Cleaning...
Page 91: If Printing Is Faint Or Uneven
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head...
Page 92: Maintenance Procedure
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink tank.
Page 93 From the printer Cleaning the Print Head From the computer • For Windows: Cleaning the Print Heads • For Mac OS: Cleaning the Print Heads After cleaning the print head, print and examine the nozzle check pattern: Step1 If the problem is not resolved after performing from step 1 to step 3 twice: Clean the print head deeply.
Page 94: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low.
Page 95 The confirmation screen will appear. 7. Select Yes. The nozzle check pattern will be printed and two pattern confirmation screens will appear on the touch screen. Examine the nozzle check pattern.
Page 96: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D. A: No missing lines/No horizontal white streaks B: Lines are missing/Horizontal white streaks are present 2.
Page 97 The printer starts cleaning the print head. Cleaning the Print Head If the pattern D or any color in the pattern C is not printed: (Example: Magenta pattern is not printed) The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen. The printer starts cleaning the print head.
Page 98: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper 1.
Page 99 The confirmation screen will appear. 7. Select Yes. The printer starts cleaning the print head. Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 minute. The pattern print confirmation screen will appear. 8.
Page 100: Deep Print Head Cleaning
Deep Print Head Cleaning If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.
Page 101 The confirmation screen will appear. 7. Select Yes. The printer starts cleaning the print head deeply. Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 1 to 2 minutes. The pattern print confirmation screen will appear.
Page 102: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the ink tank whose ink is low.
Page 103 6. Select Auto head alignment. The confirmation screen will appear. 7. Confirm the message, then select Yes. The print head alignment sheet will be printed. Important • Do not touch any printed part on the print head alignment sheet. If the sheet is stained or wrinkled, it may not be scanned properly.
Page 104 9. Close the document cover gently, then select OK. The printer starts scanning the print head alignment sheet, and the print head position will be adjusted automatically. Important • Do not open the document cover or move the print head alignment sheet on the platen glass until adjusting the print head position is complete.
Page 105: Performing Maintenance Functions From Your Computer (Mac Os)
Performing Maintenance Functions from Your Computer (Mac OS) Opening Remote UI for Maintenance Cleaning the Print Heads Adjusting Print Head Position Checking Ink Status from Your Computer...
Page 106: Opening Remote Ui For Maintenance
Opening Remote UI for Maintenance You can perform maintenance of printer and change the settings from a Remote UI. The following is the procedure to open a Remote UI. 1. Open System Preferences, and select Printers & Scanners 2. Select your model from the printer list, and click Options & Supplies... 3.
Page 107: Cleaning The Print Heads
Cleaning the Print Heads The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. Cleaning 1.
Page 108 Before running the deep cleaning, check the following items: Check whether the printer is on and open the printer's cover. Check the following items for each ink. Then, if necessary, perform Deep cleaning. • Is there ink remaining in the tank? •...
Page 109: Adjusting Print Head Position
Adjusting Print Head Position Any error in the print head installation position can cause color and line shifts. Adjusting the print head position improves print results. Auto head alignment 1. Select Utilities from Remote UI 2. Click Auto head alignment A message appears.
Page 110: Checking Ink Status From Your Computer
Checking Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. If you select Printer status from Remote UI, the ink status appears as an illustration. Estimated ink levels You can check the types and levels of ink.
Page 111: Cleaning
Cleaning Cleaning Exterior Surfaces Cleaning the Platen Glass and Document Cover Cleaning the ADF (Auto Document Feeder) Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads...
Page 112: Cleaning Paper Feed Rollers
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary.
Page 113 9. Make sure that the paper feed roller has stopped rotating, then follow the message to load the three sheets of A4 or Letter-sized plain paper. 10. Open the operation panel, then pull out the paper output tray. 11. Select OK. The printer starts cleaning.
Page 114: Cleaning Inside The Printer (Bottom Plate Cleaning)
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 115 10. Load only this sheet of paper in the cassette with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. 11. Mount the cassette cover, and then insert the cassette into the printer. 12.
Page 116 Note • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper. If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be stained. Wipe off any ink from the protrusions using a cotton swab or the like. Important •...
Page 117: Overview
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Transporting Your Printer When repairing, lending, or disposing of the printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply Using the Operation Panel Entering Numbers, Letters, and Symbols...
Page 118: Safety
Safety Safety Precautions Regulatory Information WEEE (EU&EEA)
Page 119: Safety Precautions
Safety Precautions Choosing a location • Do not install the printer in a location that is unstable or subject to excessive vibration. • Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
Page 120: Regulatory Information
Regulatory Information IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Page 121 20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or operated with any other antenna or transmitter. Canon U.S.A., Inc. One Canon Park Melville, New York 11747...
Page 122 Manual, disconnect the equipment from the telephone line cable, turn off the power and disconnect the power cord. The telephone line cable should not be reconnected or the main power switch turned ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of equipment.
Page 123 Users in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 124 of the product by Spark, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Spark's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed.
Page 125: Weee (Eu&Eea)
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon- europe.com/weee.
Page 126 U kunt ook het schema voor de afvoer van afgedankte elektrische en elektronische apparatuur (AEEA) raadplegen. Ga voor meer informatie over het inzamelen en recyclen van afgedankte elektrische en elektronische apparatuur naar www.canon- europe.com/weee.
Page 127 Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein) Aquest símbol indica que aquest producte no s’ha de llençar a les escombraries de la llar, d’acord amb la...
Page 128 Yderligere oplysninger om, hvor du kan bortskaffe dit elektronikaffald med henblik på genanvendelse, får du hos de kommunale renovationsmyndigheder. Yderligere oplysninger om returnering og genanvendelse af affald af elektrisk og elektronisk udstyr får du ved at besøge www.canon- europe.com/weee.
Page 129 Du kan få mer informasjon om hvor du kan avhende utrangert utstyr til resirkulering ved å kontakte lokale myndigheter, et godkjent WEEE-program eller husholdningens renovasjonsselskap. Du finner mer informasjon om retur og resirkulering av WEEE-produkter på www.canon-europe.com/weee. Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja Liechtenstein) alueelle.
Page 130 úřad vaší obce, správní orgán vykonávající dozor nad likvidací odpadu, sběrny OEEZ nebo služba pro odvoz komunálního odpadu. Další informace týkající se vracení a recyklace OEEZ naleznete na adrese www.canon-europe.com/weee. Csak az Európai Unió és az EGT (Norvégia, Izland és Liechtenstein) országaiban...
Page 131 WEEE lub skontaktować się z przedsiębiorstwem zajmującym się wywozem odpadów domowych. Więcej informacji o zwracaniu i recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje się w witrynie www.canon-europe.com/weee. Platí len pre štáty Európskej únie a EHP (Nórsko, Island a Lichtenštajnsko) Tento symbol znamená, že podľa Smernice 2012/19/EÚ...
Page 132 į savo miesto valdžios institucijas, atliekų tvarkymo organizacijas, patvirtintų EEĮ atliekų sistemų arba jūsų buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės informacijos apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę tinklalapyje www.canon- europe.com/weee. Samo za Evropsko unijo in EGP (Norveška, Islandija in Lihtenštajn)
Page 133 OEEO. Če želite več informacij o vračanju in recikliranju izdelkov v skladu z direktivo OEEO, obiščite www.canon-europe.com/weee. Само за Европейския съюз и ЕИП (Норвегия, Исландия и Лихтенщайн) Този...
Page 134 şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi (2012/19/EC) i vašem nacionalnom zakonu. Ovaj proizvod je potrebno predati na posebno mjesto za sakupljanje otpada, npr.
Page 135: Handling Precautions
Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Transporting Your Printer When repairing, lending, or disposing of the printer Keeping Print Quality High...
Page 136: Legal Restrictions On Scanning/Copying
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative. • Paper money • Money orders • Certificates of deposit •...
Page 137: Transporting Your Printer
Transporting Your Printer When relocating the printer, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport. • With the print head and ink tank left installed in the printer, press the ON button to turn off the power. This allows the printer to automatically cap the print head, thus preventing it from drying.
Page 138: When Repairing, Lending, Or Disposing Of The Printer
For printers with fax capabilities, user information and speed dial numbers can be backed up to a computer by utilizing the Speed Dial Utility2 software before resetting the printer or deleting data. Backed up data can be restored to the repaired printer or another Canon printer. Registering Recipients Using Speed Dial Utility2 (Windows)
Page 139: Keeping Print Quality High
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint- stick, or bleed if water or sweat comes in contact with the printed area.
Page 140: Main Components And Their Use
Main Components and Their Use Main Components Power Supply Using the Operation Panel Entering Numbers, Letters, and Symbols...
Page 141: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 142: Front View
Front View (1) operation panel Use to change the settings of the printer or to operate it. Operation Panel (2) ADF (Auto Document Feeder) Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time. Loading Documents in the ADF (Auto Document Feeder) (3) document feeder cover Open when clearing jammed documents.
Page 143 (8) rear tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time. Loading Paper in the Rear Tray Loading Envelopes (9) paper guides Align with both sides of the paper stack.
Page 144 (19) platen glass Load an original here.
Page 145: Rear View
Rear View (1) rear cover Detach when removing jammed paper. (2) transport unit cover Open when removing jammed paper. (3) power cord connector Plug in the supplied power cord. (4) USB port Plug in the USB cable to connect the printer with a computer. (5) telephone line jack Connect the telephone line.
Page 146: Inside View
Inside View (1) scanning unit / cover Scans originals. Also, lift and open it to replace an ink tank or to remove jammed paper inside the printer. (2) print head holder The print head is pre-installed. Note • For details on replacing an ink tank, see Replacing Ink Tanks.
Page 147: Operation Panel
Operation Panel * All lamps on the operation panel are shown lit in the figure below for explanatory purposes. (1) ON button/ON lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on the power, make sure that the document cover is closed.
Page 148: Power Supply
Power Supply Confirming that the Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer...
Page 149: Confirming That The Power Is On
Confirming that the Power Is On The ON lamp is lit when the printer is turned on. Even if the touch screen is off, if the ON lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 150: Turning The Printer On And Off
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The ON lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 151 Important • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval.
Page 152: Checking The Power Plug/Power Cord
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. •...
Page 153: Unplugging The Printer
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.
Page 154: Using The Operation Panel
Using the Operation Panel The operation panel consists of the touch screen (A) and buttons (B). Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and other functions. Operations on the Home Screen A: touch screen Basic Operation of the touch screen B: Buttons on the operation panel...
Page 155 Touch Touch lightly with your finger tip. To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark. Flick Flick your finger on the screen up, down, left, or right. Use to switch menus or move forward or backward through photos. Drag While lightly touching the screen, move your finger up, down, left, or right.
Page 156 Operations on the Home Screen Display the menu screen or the settings screen from the Home screen. C. Basic menu Select to copy or scan using the operation panel. After selecting a basic menu, the particular menus are displayed. D. Network status Displays the current network status.
Page 157 (Signal strength: 50 % or less): The problem such as the printer cannot print may occur. Place the printer near the wireless router. Wireless LAN is enabled but the printer is not connected to the wireless router. Wireless Direct is enabled. Wireless LAN is disabled.
Page 158: Entering Numbers, Letters, And Symbols
Entering Numbers, Letters, and Symbols When entering user or recipient names or other information, you can enter or edit characters by selecting them on the screen. Switching the Input Mode The printer has one input mode for letters and another for numbers and symbols. To switch modes, tap (A) in the lower left.
Page 159 Entering or Editing Numbers, Letters, and Symbols Enter information as follows. • To move the insertion point (cursor position) in the input field (C) (D). • To delete an entered character Move the cursor to the character to delete, and then tap (E).
Page 160: Changing Settings
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (Mac OS) Changing Settings from Operation Panel...
Page 161: Changing Printer Settings From Your Computer (Mac Os)
Changing Printer Settings from Your Computer (Mac OS) Managing the Printer Power Changing the Printer Operation Mode...
Page 162: Managing The Printer Power
Managing the Printer Power Printer power supply is operated from Remote UI. Energy saving settings Energy saving settings allows you to set Auto power off and Auto power on. Auto power off is the function wherein the printer automatically turns itself off, when data is not sent or the printer remains inactive for a certain period.
Page 163: Changing The Printer Operation Mode
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. 1. Check whether the printer is on and select Device settings from Remote UI 2. If necessary, complete the following settings: Print settings - Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
Page 164: Changing Settings From Operation Panel
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel FAX settings Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Feed settings Reset setting Web service setup System information ECO settings Quiet setting...
Page 165: Changing Settings From Operation Panel
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3.
Page 166 For more on setting items on the operation panel: Setting Items on Operation Panel...
Page 167: Setting Items On Operation Panel
Setting Items on Operation Panel Items for Printer FAX settings Device user settings Web service setup Language selection ECO settings Quiet setting Items for Paper/Printing Print settings Feed settings PictBridge print settings Items for Maintenance/Management System information Firmware update LAN settings Reset setting...
Page 168: Fax Settings
FAX settings FAX user settings Advanced FAX settings Auto print settings Security control Easy setup Note • Before changing the settings, you can confirm the current settings by printing USER'S DATA LIST. Summary of Reports and Lists FAX user settings •...
Page 169 If you select ON, you can specify the maximum number of redial attempts and the length of time the printer waits between redial attempts. • Dial tone detect Avoids mistransmission when reception and transmission occur at the same time. If you select ON, the printer transmits the fax after confirming the dial tone. Note •...
Page 170 When the telephone line condition or connection is poor, selecting a lower transmission start speed may solve transmission problems. ◦ RX start speed Selects the fax reception speed. The fax reception start speed will be faster as the value is bigger. When the telephone line condition or connection is poor, selecting a lower reception start speed may solve reception problems.
Page 171 Security control • FAX number re-entry If you select ON, you can set the printer to send faxes after entering the number twice. By using this setting, you can avoid the mistransmission of faxes. Preventing Mistransmission of Faxes • Check RX FAX information If you select ON, the printer checks whether the recipient's fax device information matches the dialed number.
Page 172: Print Settings
Print settings • Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. •...
Page 173: Lan Settings
LAN settings Wireless LAN Wireless Direct Common settings Wireless LAN • WLAN active/inactive Enables/disables wireless LAN. • Wireless LAN setup Selects the setup method for wireless LAN connection. ◦ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g.
Page 174 Items Setting SSID XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX (up to 32 characters) Wireless LAN security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/ WPA2-PSK(TKIP)/WPA2-PSK(AES) Signal strength (%) IPv4 address XXX. XXX. XXX. XXX (12 characters) IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters) IPv4 default gateway XXX. XXX. XXX. XXX (12 characters) IPv6 address XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
Page 175 • Wireless Direct setting list The list of Wireless Direct settings of this printer is displayed on the touch screen. Select Print details and then Yes to print the list. Printing Network Settings Important • The network settings printout contains important information about your network. Handle it with care.
Page 176 Specifies the printer name. You can use up to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. •...
Page 177 • RAW protocol Enables/disables RAW printing. • LLMNR Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer to detect printer's IP address from the printer name without a DNS server. • PictBridge communication Setting items for printing from a PictBridge (Wireless LAN) compliant device. ◦...
Page 178: Device User Settings
Device user settings • Date/time setting Sets the current date and time. For more on the procedure: Setting Sender Information • Date display format Changes the display format of dates. • Daylight saving time setting Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.
Page 179 • Device info sending settings Selects whether you will send the printer usage information to Canon server. The information sent to Canon will be utilized to develop better products. Select Agree to send the printer usage information to Canon server.
Page 180 Allows you to check the PIN code and change it. Important • When you change the PIN code, pairing with all Bluetooth compatible devices is canceled. ◦ Set Bluetooth device name Specifies the printer name for Bluetooth connection. Note • If the printer cannot be paired to the Bluetooth compatible device after you changed some settings in Bluetooth settings see below.
Page 181: Language Selection
Language selection Changes the language for the messages and menus on the touch screen.
Page 182: Firmware Update
Firmware update You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Note • Only Check current version is available when Inactive is selected for WLAN active/inactive of Wireless LAN in LAN settings.
Page 183: Feed Settings
Feed settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 184: Reset Setting
LAN settings and the telephone/fax number are not returned back to the default. • Device info sending settings only Applies the setting not to send the device information to Canon. • FAX settings only Returns all fax settings back to the default. Disconnect the telephone line from the printer before you return this setting item back to the default.
Page 185: Web Service Setup
◦ IJ Cloud Printing Center setup Registers/Deletes the printer to/from Canon Inkjet Cloud Printing Center. ◦ Check Web service setup Make sure whether the printer is registered to Google Cloud Print or Canon Inkjet Cloud Printing Center. • DNS server setup Performs settings for a DNS server.
Page 186: System Information
System information To display this menu, select System information on Setup. • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number. • MAC address of wireless LAN Displays the MAC address for wireless LAN.
Page 187: Eco Settings
ECO settings This setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the printer automatically to save electricity. Using Duplex Printing Using Power Saving Function Using Duplex Printing Follow the procedure below to use duplex printing. Make sure printer is turned on.
Page 188 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select ECO. 5. Select Energy saving settings. 6. Check on-screen instructions and select Next. 7. Specify settings as necessary. A. Specify the length of time to turn the printer off automatically when no operation is made or no printing data is sent to the printer.
Page 189: Quiet Setting
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. Make sure printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3.
Page 190 You can specify the hour from 0 to 24. 2. Confirms starting time. After specifying the starting time, specify the ending time following the same procedure. B. Confirms the time to start and to end. The confirmation screen is displayed and the icon appears as the Quiet setting menu icon.
Page 191: Specifications
Specifications General Specifications Printing resolution (dpi) 4800* (horizontal) x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. Interface USB Port: Hi-Speed USB *1 LAN Port: Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2 *1 A computer that complies with Hi-Speed USB standard is required.
Page 192 • Letter: 0.26 inches (6.4 mm) • Other sizes: 0.14 inches (3.4 mm) -Right margin: • Letter: 0.25 inches (6.3 mm) • Other sizes: 0.14 inches (3.4 mm) Operating environment Temperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions.
Page 193 (Automatic fallback) Transmission speed Black: Approx. 3 seconds/page at 33.6 kbps (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 for others, both in standard mode.) Color: Approx. 1 minute/page at 33.6 kbps (Based on Canon COLOR FAX TEST SHEET.)
Page 194 Dialing Automatic dialing - Recipient (max. 100 destinations) - Group dial (max. 99 destinations) Regular dialing Automatic redialing Manual redialing (max. 10 destinations) Others Activity report (after every 20 transactions) Sequential broadcasting (max. 101 destinations) Rejected numbers (max. 10 destinations) Error reduction setting (VoIP) * * For details, see "Error reduction setting (VoIP)"...
Page 195 XGA 1024 x 768 Other Supported OS iOS, Android, Windows 10 Mobile Some functions may not be available with the supported OS. Refer to the Canon web site for details. Mobile Printing Capability Apple AirPrint Google Cloud Print PIXMA Cloud Link •...
Page 196: Information About Paper
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area...
Page 197: Supported Media Types
• For details on page sizes and media types, access the Canon website. • Genuine Canon paper is not available in some countries or regions. Note that in the United States, Canon paper is not sold by model number. Instead, purchase paper by name.
Page 198 - Maximum size: 8.50 x 11.69 inches (215.9 x 297.0 mm) Paper Weight You can use paper in the following weight range. • 17 to 28 lb (64 to 105 g /m ) (plain paper other than genuine Canon paper)
Page 199: Paper Load Limit
Rear Tray Cassette Tray Canon Red Label Superior <WOP111> Approx. 100 sheets Approx. 100 sheets Approx. 50 sheets Canon Océ Office Colour Paper <SAT213> Approx. 80 sheets Approx. 80 sheets Approx. 50 sheets High Resolution Paper <HR-101N>*1 Approx. 80 sheets Approx.
Page 200 Paper other than Genuine Canon Paper Paper Output Common Name Rear Tray Cassette Tray Plain Paper (including recycled paper)*1 Approx. 100 sheets (10 Approx. 100 sheets Approx. 50 sheets: Legal) sheets (10 sheets: Legal) Envelopes 10 envelopes T-Shirt Transfers 1 sheet : A4...
Page 201: Unsupported Media Types
• Paper that is too thin (weighing less than 17 lb (64 g /m • Paper that is too thick (plain paper weighing more than 28 lb (105 g /m ), except for Canon genuine paper) • Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing on paper smaller than A5) •...
Page 202: Handling Paper
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
Page 203: Printing
Printing Printing from Computer Printing from Smartphone/Tablet Printing from Digital Camera Printing Using Operation Panel Paper Settings...
Page 204: Printing From Computer
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (AirPrint) Printing Using Canon Application Software Printing Using a Web Service...
Page 205: Printing From Application Software (Airprint)
Printing from Application Software (AirPrint) Printing Using AirPrint Basic Adding AirPrint Printer How to Open AirPrint Printer Settings Screen Display the Printing Status Screen Deleting the Undesired Print Job Removing AirPrint Printer That Is No Longer Required from List of Printers...
Page 206: Printing Using Airprint
Printing Using AirPrint You can print photographs, E-mails, web pages, and other documents using AirPrint, even if the printer driver is not installed or the application is not downloaded. Print with AirPrint from a Mac Check that printer power is on Note •...
Page 207 Set items such as Paper Size to the appropriate size, as well as Feed from and Media Type from Media & Quality of the pop-up menu. Important • An error may occur if the paper size/type set in the print dialog is different from the paper size/ type set on the printer.
Page 208 Print result image Orientation of print data Orientation of loading envelope The print data is rotated by 180 degrees Load the envelope in vertically with the address side against the print result image. facing up so that the folded flap of the envelope will be faced down on the right side.
Page 209: Adding Airprint Printer
Adding AirPrint Printer Procedure for adding AirPrint printer to your Mac is explained. To re-add a printer that was deleted, open System Preferences -> Printers & Scanners, click + next to the printer list, and then perform the procedure described below. 1.
Page 210: How To Open Airprint Printer Settings Screen
How to Open AirPrint Printer Settings Screen The settings screen of the AirPrint printer can be displayed from your application software. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup dialog opens.
Page 211: Display The Printing Status Screen
Display the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock.
Page 212: Deleting The Undesired Print Job
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners 2.
Page 213: Removing Airprint Printer That Is No Longer Required From List Of Printers
Removing AirPrint Printer That Is No Longer Required from List of Printers AirPrint printer that is no longer in use can be removed from the list of printers. Before removing AirPrint printer, remove the cable connecting the printer and PC. You cannot remove the AirPrint printer if not logged in as the administrator.
Page 214: Printing From Smartphone/Tablet
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android) Printing from Windows 10 Mobile Device Printing/Scanning with Wireless Direct...
Page 215: Printing From Ios Device (Airprint)
Printing from iOS Device (AirPrint) Use AirPrint to print photographs, E-mails, web pages, and other documents without having to download special applications. Checking Your Environment First, check your environment. • AirPrint Operation Environment iPhone, iPad, and iPod touch running the latest version of iOS •...
Page 216 Menu options appear. 4. Tap Print 5. Select your model name from Printer on Printer Options. Important • Because some applications do not support AirPrint, Printer Options may not be displayed. If an application does not let you use printer options, you cannot print from that application.
Page 217 6. Check Print Settings Set the number of copies to be printed and print options, as needed. 7. Tap Print When you execute printing, the printer prints according to the specified settings. Note • It can take the wireless LAN a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
Page 218 Checking Print Status You can check the print status of AirPrint from Print Center. Click the Home button in the iOS device twice to switch to multitask mode, swipe towards the right to display Print Center, then tap on it. Deleting Print Job To delete a print job with AirPrint, use one of the following two methods: •...
Page 219: Printing/Scanning With Wireless Direct
Printing/Scanning with Wireless Direct You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices using Wireless Direct) This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly.
Page 220 7. Select Wireless Direct active/inactive. 8. Select ON. The confirmation screen asking if you display the password information appears. 9. Select Yes or No. The list of Wireless Direct settings is displayed. The device detects the printer by the identifier (SSID). Note •...
Page 221 • For more on printing or scanning from a device via wireless LAN, refer to the device's or application's instruction manual. • You can print/scan from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
Page 222 4. Select Device settings. 5. Select LAN settings. 6. Select Wireless Direct. 7. Select a setting item. • To change the identifier (SSID) for Wireless Direct Select A to display the setting screen of the identifier (SSID). The identifier (SSID) is the printer's name (device name) displayed on a Wi-Fi Direct compatible device.
Page 223 • To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer Select C to display the confirmation screen. If you want the printer to display the screen to inform you a Wi-Fi direct compatible device is connecting to the printer, select Yes. Important •...
Page 224: Printing Using Operation Panel
Printing Using Operation Panel Printing Templates Such as Lined or Graph Paper...
Page 225: Printing Templates Such As Lined Or Graph Paper
Printing Templates Such as Lined or Graph Paper You can print a template form such as lined paper, graph paper, or checklist, etc. on A4, B5, or Letter-sized plain paper. Printable template forms Printing template forms Printable template forms The following templates are available: •...
Page 226 • Staff paper You can print staff paper with 10 or 12 staves. Setting on the touch screen: ◦ Staff paper 1 (10 staves) ◦ Staff paper 2 (12 staves) • Handwriting paper You can print handwriting paper. Setting on the touch screen: Handwriting paper (3 lines) •...
Page 227 4. Select Templates. 5. Select template you want to print. Printable template forms 6. Specify settings as necessary. You can specify the following setting items. • Copies Specify the number of copies. • Page size Select the page size depending on the loaded paper. Note •...
Page 228 • Notebook paper 2 (7 mm) • Notebook paper 3 (6 mm) • Graph paper 1 (5 mm grid) • Graph paper 2 (3 mm grid) • Handwriting paper (3 lines) Press the Black button for printing following forms. • Checklist •...
Page 229: Paper Settings
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 230 • When you insert the cassette: The screen to register the cassette paper information is displayed. Register the paper size and the media type according to the loaded paper. * You can load only plain paper in the cassette. Important •...
Page 231 When you start printing or copying, a message is displayed. Selecting OK on the touch screen displays the paper setting specified for printing or copying under the message. Check the message and select OK. When the screen to select the operation is displayed, select one of the operations below.
Page 232 For example, when the paper setting for printing or copying is A5 and the paper information registered to the printer is A4, you load A5 sized paper before you start printing or copying. The paper information registration screen is displayed after replacing the paper and closing the feed slot cover or inserting the cassette.
Page 233: Copying
Copying Reducing/Enlarging Copies Making Copies Basics Two-Sided Copying Collated Copying Special Copy Menu Copying Using Smartphone or Tablet...
Page 234: Making Copies
Making Copies This section describes the procedure to copy with Standard copy. Make sure printer is turned on. Load paper. 3. Select Copy on the HOME screen. Using the Operation Panel 4. Select Standard copy. The Copy standby screen is displayed. Load original document on platen glass or in ADF.
Page 235 F. Flick to specify the number of copies. G. Specifies the number of copies. If you keep touching here, the number scrolls by 10. C. Displays the print setting items. For more on the setting items: Setting Items for Copying D.
Page 236 Important • If you load the original on the platen glass, do not open the document cover or remove the original while Scanning document... is displayed on the touch screen. • If you load the original in the ADF, do not move the original until copying is complete. Note •...
Page 237: Setting Items For Copying
Setting Items for Copying You can change the copy settings such as magnification and intensity. Print Settings Screen Note • For more on the print setting screen or the setting item for Photo copy, see Copying Photos. How to display the print setting screen varies with the copy menu. •...
Page 238 displayed on the touch screen. In this case, select on the upper left on the touch screen to check the message and change the setting. • The settings of the page size, media type, etc. are retained even if the printer is turned off. •...
Page 239 Important • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again. • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
Page 240: Scanning
Scanning Scanning from Computer (Windows) Scanning from Computer (AirPrint) Scanning from Operation Panel Scanning Using Smartphone/Tablet...
Page 241: Scanning From Computer (Airprint)
Scanning from Computer (AirPrint) Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Scanning Tips Positioning Originals (Scanning from Computer)
Page 242: Scanning According To Item Type Or Purpose (Ij Scan Utility Lite)
Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Important • Available functions and settings vary depending on your scanner or printer.
Page 243: Ij Scan Utility Lite Features
IJ Scan Utility Lite Features Use IJ Scan Utility Lite to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Important • The displayed items and available functions vary depending on your scanner or printer. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items.
Page 244 Note • To set the applications to integrate with, see Settings Dialog.
Page 245: Scanning Easily (Auto Scan)
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen or ADF (Auto Document Feeder). Important • This function is not supported depending on your model. • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (selection boxes;...
Page 246 Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Page 247: Scanning Documents And Photos
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the item on the platen. Positioning Originals (Scanning from Computer) 2.
Page 248: Scanning Tips
Scanning Tips Positioning Originals (Scanning from Computer)
Page 249: Positioning Originals (Scanning From Computer)
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen or ADF (Auto Document Feeder) for scanning. If items are not placed correctly they may not be scanned correctly. Important • Do not place objects on the document cover. When you open the document cover, the objects may fall into your scanner or printer, resulting in malfunction.
Page 250 Important Important • Large items (such as A4 size photos) that cannot be • For the portions in which items cannot be scan- placed away from the edges/arrow (alignment mark) of ned, click Home to return to the top page of the the platen may be saved as PDF files.
Page 251 2. Place documents on ADF, and then adjust document guides to width of documents. Insert the documents face-up until a beep sounds. To scan both sides of the documents, place the documents face-up. Note • When scanning duplex documents, place the front sides facing up. They will not be scanned correctly if placed the other way around.
Page 252: Faxing
Faxing Preparing for Faxing Registering Recipients Sending Faxes from Computer (Windows) Sending Faxes Using Operation Panel of Printer Sending Faxes from Computer (Mac OS) Receiving Faxes Other Useful Fax Functions...
Page 253: Preparing For Faxing
Preparing for Faxing Connect the printer to the telephone line and set up the printer before using the faxing functions. Then specify the basic setting such as sender information, date/time, and daylight saving time. Important • If the Power Disconnects: If there is a power failure or if you accidentally unplug the power cord, the date/time settings will be reset.
Page 254: Connecting Telephone Line
Connecting Telephone Line The connection method differs depending on your telephone line. • If you connect the printer to wall telephone line directly/If you connect the printer with the xDSL splitter: Basic Connection • If you connect the printer to another line such as an xDSL: Connecting Various Lines If the connection is incorrect, the printer cannot send/receive faxes.
Page 255 Important • Be sure to connect the telephone line before the printer is turned on. If you connect the telephone line when the printer is turned on, turn the printer off and unplug the power cord. Wait for 1 minute, and then connect the power plug. Note •...
Page 256 A. Digital Subscriber Line B. xDSL modem (splitter may not be built-in to the modem) C. Broadband router compatible with Internet Telephone D. Computer E. Telephone or answering device F. WAN (Wide Area Network) port G. LAN (Local Area Network) port H.
Page 257 • Connecting to an ISDN Line For details on ISDN (Integrated Service Digital Network) connection and settings, refer to the manuals supplied with your terminal adapter or dial-up router.
Page 258: Setting Telephone Line Type
Setting Telephone Line Type Before using your printer, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type. Important •...
Page 259 Rotary pulse Select when your telephone line type is pulse dialing. Touch tone Select when your telephone line type is tone dialing. Setting the Telephone Line Type Manually in China This section describes the procedure to set the telephone line type manually in China. Make sure that printer is turned on.
Page 260 10. Select a telephone line type. Rotary pulse Select when your telephone line type is pulse dialing. Touch tone Select when your telephone line type is tone dialing.
Page 261: Setting Receive Mode
Setting Receive Mode Set the receiving operation (receiving mode). For details on how to set the receive mode: Setting Receive Mode You can select the appropriate mode. For details on the selectable receive mode: About Receive Mode For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode Note •...
Page 262 • For details on the receive mode: About Receive Mode • DRPD is available only in the US and Canada. • Network switch may not be available depending on the country or region of purchase. • Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode.
Page 263 If you select Manual/auto switch: ON, the printer automatically receives faxes after the external device rang a specified length of time. You can specify the length of time until automatic reception is started. ◦ RX start time You can specify the length of time until automatic reception is started when Manual/auto switch: ON is selected.
Page 264 • Advanced setting in Network switch You can specify the following setting item. ◦ Ring count You can specify the number of times the external device rings when incoming. Specify the number of time and select OK. Setting DRPD Ring Pattern (US and Canada only) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls...
Page 265 8. Specify number of time and select OK. 9. Select OK. The Function list screen is displayed.
Page 266: Setting Sender Information
Setting Sender Information You can set the sender information such as date/time, unit name, and unit fax/telephone number. About Sender Information Setting Date and Time Setting Daylight Saving Time (Summer Time) Registering User Information About Sender Information If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.
Page 267 Setting Date and Time This section describes the procedure to set the date and time. Make sure that printer is turned on. 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select Device settings. 5.
Page 268 8. Set time. 1. Select a setting item to change. 2. Select number to enter. Enter the date and time in 24-hour format. 3. Select OK. 4. Select OK again when all settings are completed. 9. Press HOME button to return to HOME screen. Setting Daylight Saving Time (Summer Time) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.
Page 269 2. Select Setup on the HOME screen. Using the Operation Panel 3. Select Settings. 4. Select Device settings. 5. Select Device user settings. 6. Select Daylight saving time setting. 7. Select ON. To disable summer time, select OFF. 8. Set date and time when summer time starts. 1.
Page 270 9. Set date and time when summer time ends. 1. Set date when summer time ends. Select a setting item to change, and then specify the setting. Select OK again when all settings are completed. 2. Set time (in 24-hour format) when summer time ends. Select a setting item to change, and then specify the setting.
Page 271 4. Select Device settings. 5. Select FAX settings. 6. Select FAX user settings. 7. Select User information settings. The screen to register the unit name and the unit fax/telephone number is displayed. 8. Enter unit name. 1. Select entry field under Unit name. The screen to enter the character is displayed.
Page 272 2. Enter unit fax/telephone number. 3. Select OK. Note • You can enter the fax/telephone number up to 20 digits, including spaces. • For details on how to enter or delete characters: Entering Numbers, Letters, and Symbols 10. Select Register to finalize registration.
Page 273: Registering Recipients
Registering Recipients Registering Recipients Using Operation Panel of Printer Registering Recipients Using Speed Dial Utility2 (Windows) Registering Recipients Using Speed Dial Utility2 (Mac OS)
Page 274: Registering Recipients Using Operation Panel Of Printer
Registering Recipients Using Operation Panel of Printer Registering recipients in the printer's directory in advance allows you to dial fax/telephone numbers simply. The following methods to register are available: • Recipient registration Registering the recipient's fax/telephone number and name allows you to send a fax by selecting a registered recipient in the printer directory.
Page 275: Registering Fax/Telephone Number Of Recipients
Registering Fax/Telephone Number of Recipients Before you can use the printer's directory, you need to register the recipients' fax/telephone numbers. Follow the procedure below to register the recipients' fax/telephone numbers. Make sure that printer is turned on. 2. Select FAX on the HOME screen. Using the Operation Panel The Fax standby screen is displayed.
Page 276 8. Select a registration method. 9. Register recipients' fax/telephone number. Register the recipients' fax/telephone number depending on the registration method selected. • By entering the number The screen to register the recipient's fax/telephone number and name is displayed. Go to next step.
Page 277 Note • This registration method may not be available depending on the country or region of purchase. 10. Enter recipient's name. If you select From incoming call log as a registration method, the recipient's name may be already entered. If you do not change the name, go to next step. 1.
Page 278 Note • You can enter the fax/telephone number up to 60 digits (40 digits for the US, Canada, Korea and some regions of Latin America), including spaces. Entering Numbers, Letters, and Symbols • When Telephone line type in FAX user settings under FAX settings is set to Rotary pulse, you can enter a tone ("T") by selecting the Tone key.
Page 279: Registering Recipients In Group Dial
Registering Recipients in Group Dial If you register two or more registered recipients to a group dial, you can send the same document successively to all recipients registered to the group dial. Make sure that printer is turned on. 2. Select FAX on the HOME screen.
Page 280 8. Enter group name. 1. Select entry field of group name. The screen to enter the character is displayed. 2. Enter group name. 3. Select OK. Note • You can enter the name up to 16 characters, including spaces. Entering Numbers, Letters, and Symbols 9.
Page 281 Display by ID number A. Select to switch the display by name and by ID number. B. Select to display the screen to select an initial. You can search the registered recipient by initial. By selecting the initial, the registered recipients are displayed in alphabetical order from the selected character.
Page 282 Note • To delete the recipient from the group dial, select a recipient that you want to delete from the list. After the confirmation screen is displayed, select Yes to delete the recipient from the group dial. 3. To add another member, select Add member again. The printer's directory is displayed.
Page 283: Changing Registered Information
Changing Registered Information To change information registered for recipient and group dial, follow the procedure below. Make sure that printer is turned on. 2. Select FAX on the HOME screen. Using the Operation Panel The Fax standby screen is displayed. 3.
Page 284 When the confirmation screen is displayed, select Yes to delete the recipient from the group dial. 5. Select Complete to finalize changing.
Page 285: Deleting Registered Information
Deleting Registered Information To delete information registered for recipient and group dial, follow the procedure below. Make sure that printer is turned on. 2. Select FAX on the HOME screen. Using the Operation Panel The Fax standby screen is displayed. 3.
Page 286: Printing List Of Registered Destinations
Printing List of Registered Destinations You can print a list of the fax/telephone numbers and can keep it near the printer to refer to when dialing. Make sure that printer is turned on. Load paper. 3. Select FAX on the HOME screen. Using the Operation Panel The Fax standby screen is displayed.
Page 287: Registering Recipients Using Speed Dial Utility2 (Mac Os)
Registering Recipients Using Speed Dial Utility2 (Mac OS) About Speed Dial Utility2 Speed Dial Utility2 is a utility for forwarding the telephone directory registered on the printer to a computer and registering/changing it on the computer. In addition, you can register the telephone directory edited on the computer to the printer.
Page 288: Starting Up Speed Dial Utility2
Follow the procedure below to start up Speed Dial Utility2. 1. Select Applications on Go menu of Finder. 2. Double-click Canon Utilities folder. 3. Double-click Speed Dial Utility2 folder. 4. Double-click Speed Dial Utility2. Speed Dial Utility2 starts up.
Page 289: Speed Dial Utility2 Dialog
Speed Dial Utility2 Dialog The following items are on the Speed Dial Utility2 dialog. 1. Printer Name: Selects the printer for editing the telephone directory using Speed Dial Utility2. Behind printer name, printer's MAC address is displayed. Note • For checking printer's MAC address, refer to "Checking Network Information" for your model from Home of the Online Manual.
Page 290 Note • By clicking on the item name, you can sort the display order. 5. Edit.../Select All/Delete Edits the item that selected for Setting Item List:, or deletes the item, or selects all the items. When multiple items on the registered information list are selected, you cannot use the Edit... button. 6.
Page 291: Saving Registered Telephone Directory On Printer To Your Computer
Saving Registered Telephone Directory on Printer to Your Computer Follow the procedure below to save the telephone directory (includes recipients' name, recipients' fax/ telephone number, group dial, user's name, user's fax/telephone number, and rejected numbers) that registered on the printer to the computer. Start up Speed Dial Utility2.
Page 292: Registering A Fax/Telephone Number Using Speed Dial Utility2
Registering a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to register fax/telephone numbers. Note Before you register fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 293 Note • You can only add the numbers that have already been registered. 6. Click OK. To continue registering fax/telephone numbers or a group dial, repeat steps 4 to 6. • To save the registered information on the computer. 1. Click Save to PC..2.
Page 294: Changing A Fax/Telephone Number Using Speed Dial Utility2
Changing a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to change fax/telephone numbers. Note • Before you change fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 295 To delete a member: Select a code to delete from group dial, and then click << Delete. 5. Click OK. To continue changing fax/telephone numbers or group dials, repeat steps 4 and 5. • To save the edited information on the computer. 1.
Page 296: Deleting A Fax/Telephone Number Using Speed Dial Utility2
Deleting a Fax/telephone Number Using Speed Dial Utility2 Follow the procedure below to delete fax/telephone numbers. Note • Before you delete fax/telephone numbers using Speed Dial Utility2, make sure that no fax operations are in progress. Start up Speed Dial Utility2. 2.
Page 297: Changing Sender Information Using Speed Dial Utility2
Changing Sender Information Using Speed Dial Utility2 Follow the procedure below to change the user's name or fax/telephone number. Start up Speed Dial Utility2. 2. Select a printer from Printer Name: list box, and then click Display Printer Settings. 3. Click User Information Setting from Setting Item List:. The user's information is displayed.
Page 298: Registering/Changing Rejected Number Using Speed Dial Utility2
Registering/Changing Rejected Number Using Speed Dial Utility2 Follow the procedure below to register, change, or delete rejected numbers. Start up Speed Dial Utility2. 2. Select a printer from Printer Name: list box, and then click Display Printer Settings. 3. Click Rejected Number Setting from Setting Item List:. The list of rejected numbers is displayed.
Page 299: Registering Telephone Directory Has Been Saved On Your Computer To Printer
Registering Telephone Directory Has been Saved on Your Computer to Printer You can load the data of the telephone directory (RSD file, *.rsd) and register it to your printer. The data of the telephone directory (RSD file, *.rsd) that is exported from other printer can be loaded and registered to your printer.
Page 300: Sending Faxes Using Operation Panel Of Printer
Sending Faxes Using Operation Panel of Printer Sending Faxes by Entering Fax/Telephone Number Basic Resending Faxes (Redialing Busy Number) Setting Items for Sending Faxes...
Page 301: Sending Faxes By Entering Fax/Telephone Number
Sending Faxes by Entering Fax/Telephone Number This section describes dialing and sending faxes directly by entering the fax/telephone numbers. Important • It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone.
Page 302 E. Redial Select to send faxes with redialing. Resending Faxes (Redialing Busy Number) F. On hook dial Select to send faxes with the on hook dial function. Using On Hook Dial Function G. Directory You can select a registered fax/telephone number. Sending Fax to Registered Recipient H.
Page 303 Enters the number. B. Pause Enters a pause "P". C. Delete Deletes the entered number. D. Blank space Enters a blank space. 3. Select OK. The touch screen returns to the Fax standby screen. 5. Press Color button for color transmission, or Black button for black & white transmission. The printer starts scanning the document.
Page 304 • If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF. Remove the document from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.
Page 305: Resending Faxes (Redialing Busy Number)
Resending Faxes (Redialing Busy Number) There are two methods of redialing: Automatic redialing and Manual redialing. • Automatic Redialing If you send a document and the recipient's line is busy, the printer will redial the number after a specified interval. Automatic Redialing •...
Page 306 Make sure that printer is turned on. Load documents on platen glass or in ADF. 3. Select FAX on the HOME screen. Using the Operation Panel The Fax standby screen is displayed. 4. Change send settings as necessary. Setting Items for Sending Faxes 5.
Page 307: Setting Items For Sending Faxes
Setting Items for Sending Faxes You can change the send settings such as the scan contrast or the scan resolution on the Fax standby screen. Select to change the send settings. • ScanRes. The following settings of the scan resolution are selectable. Standard Suitable for text-only documents.
Page 308 The touch screen returns to the Fax standby screen when you finish specifying the setting and selecting OK.
Page 309: Sending Faxes From Computer (Mac Os)
Sending Faxes from Computer (Mac OS) Sending Faxes Using AirPrint General Notes (Fax Transmission Using AirPrint)
Page 310: Sending Faxes Using Airprint
Sending Faxes Using AirPrint You can send faxes from a printer using AirPrint. To send faxes, add your printer to your computer. Checking Environment First, check your environment. • AirPrint operation environment A computer running Mac OS. Note • For supported operating system versions, click Home to return to the top page of the Online Manual for your model and search for "Specifications."...
Page 311 To open the Print dialog, you typically select Print... from the File menu of your application software. 4. Select Canon XXX series - Fax (where "XXX" is the model name) from Printer list. 5. Specify fax paper settings as needed.
Page 312 6. Enter fax/telephone numbers in To.
Page 313 If you specify a dialing prefix, enter the code in Dialing Prefix and specify the cover page settings as needed. 7. Click Fax. The number is dialed automatically and the fax is sent. Note • To cancel sending the fax, press the printer's Stop button. Automatic Redialing If the fax could not be sent (for example, when the recipient was busy), the number is redialed automatically according to the automatic redialing setting of the printer.
Page 314: General Notes (Fax Transmission Using Airprint)
General Notes (Fax Transmission Using AirPrint) Sending faxes is subject to the following restrictions. • Enter the characters in To and Dialing Prefix so that the total number of characters is within 40 characters. • You can use the following characters for To: Character Explanation 0 - 9 * #...
Page 315: Receiving Faxes
Receiving Faxes Receiving Faxes Changing Paper Settings Memory Reception...
Page 316: Receiving Faxes
Receiving Faxes This section describes the preparation necessary for receiving a fax and how to receive a fax. Preparing for Receiving Fax Prepare for receiving a fax according to the following procedure. Make sure that printer is turned on. 2. Select FAX on the HOME screen.
Page 317 Note • For details on the receive mode: Setting Receive Mode • You can specify the advanced settings of each receive mode. For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode • If the printer was not able to print a received fax, the printer stores the unprinted fax temporarily in its memory (memory receiving).
Page 318 The number of times to ring the telephone until switching to fax reception can be changed. • Set the printer to enable you to initiate fax reception from a connected telephone (remote reception). Remote Reception • When the answering device is connected to the printer: •...
Page 319 Note • If a telephone is connected to the printer, the telephone will ring when a call incomes. • You can change the number of times to ring the telephone with Ring count in Advanced. When DRPD or Network switch is selected: •...
Page 320 Note • To use this feature, you need to subscribe to a compatible service provided by your telephone company. • For DRPD You need to select the appropriate ring pattern on the printer. Setting DRPD Ring Pattern (US and Canada only) •...
Page 321: Changing Paper Settings
Changing Paper Settings This printer prints received faxes to paper loaded in the printer beforehand. You can use the operation panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper. Important •...
Page 322 A. Page size Select the page size from A4, Letter, or Legal. B. Type (Media type) The paper type is set to Plain paper. C. Paper src Select a paper source (Rear tray/Cassette/Auto) where paper is loaded. Note • When Auto is selected, paper is fed from the paper source where the paper that matches the paper settings (page size and media type) is loaded.
Page 323: Memory Reception
Memory Reception If the printer was not able to print the received fax, the received fax is stored in the printer's memory. The FAX Memory lamp is lit and Received in memory. is displayed at the Fax standby screen. Important •...
Page 324 Auto print settings ◦ Paper has run out: Load the paper and select OK on the touch screen. ◦ A different size of paper from that specified by Page size in FAX paper settings is loaded: Load the same size of paper as that specified by Page size in FAX paper settings, and then select OK on the touch screen.
Page 325: Other Useful Fax Functions
Other Useful Fax Functions Document Stored in Printer's Memory...
Page 326: Document Stored In Printer's Memory
Document Stored in Printer's Memory If the sending faxes is not complete or the printer was not able to print the received faxes, these faxes are stored in the printer's memory. If an error occurred during a fax transmission, the document is not stored in the printer's memory. In the following cases, the printer is not able to print the received fax and will automatically store the fax in its memory.
Page 327: Printing Document In Printer's Memory
Printing Document in Printer's Memory You can print a specified document in the printer's memory or print all the received documents in its memory at a time. When printing a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents (MEMORY LIST) first.
Page 328 6. Select a print menu. • To print the memory list (MEMORY LIST): You can print a list of the documents in the printer's memory by selecting Print doc. list. When the print confirmation screen is displayed, select Yes. The printing starts. MEMORY LIST shows the transaction number of the unsent or unprinted fax (TX/RX NO.), transaction mode, recipient's number, and the date and time of the transaction.
Page 329: Deleting Document In Printer's Memory
Deleting Document in Printer's Memory You can delete a specified document in the printer's memory or delete all the documents in its memory at a time. Note • When deleting a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents (MEMORY LIST) first.
Page 330 5. Select a delete menu. • To specify a document to delete: Select a document to delete on the Memory list screen, select Delete specified doc.. Note • If the specified document is not stored in the printer's memory, There is no document that can be deleted.
Page 331: Frequently Asked Questions
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wireless LAN Network Key Unknown Network Cannot Print or Connect For other questions about network, click here. Printing Does Not Start Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear Print Results Are Unsatisfactory Print List of Support Code for Error (Paper Jams)
Page 332 Paper Does Not Feed Properly/"No Paper" Error Automatic Duplex Printing Problems Print Results Are Unsatisfactory Scanning Problems (Windows) Scanning Problems (Mac OS) Scan Results Are Unsatisfactory (Windows) Scan Results Are Unsatisfactory (Mac OS) Cannot Print/Scan from Smartphone/Tablet Errors Often Occur When You Send a Fax Quality of Received Fax is Poor Cannot Dial Telephone Disconnects During a Call...
Page 333 Installation and Download Problems Errors and Messages If You Cannot Solve a Problem...
Page 334: Network Settings And Common Problems
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use. Wireless LAN Wireless Direct Wireless LAN Cannot Find Printer Cannot Find Printer while Using Wireless LAN Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen Cannot Find Printer after Searching it on Printer Detection Screen During Setup...
Page 335 Cannot Connect Smartphone/Tablet to Wireless Router Checking Wireless Router SSID for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printing Is Slow Ink Level Not Shown on Printer Status Monitor (Windows)
Page 336: Network Communication Problems
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems...
Page 337: Cannot Find Printer On Network
Cannot Find Printer on Network While performing printer setup: Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen While using printer: Cannot Find Printer while Using Wireless LAN...
Page 338: Cannot Find Printer On Check Printer Settings Screen During Setup (Windows)
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by Automatic search on the Search for Printers screen, click Redetect and search for the printer again by the IP address on the Search for Printers screen.
Page 339: Checking Power Status
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Power Status Are printer and network device (router, etc.) turned on? Make sure the printer is turned on. Confirming that the Power Is On Make sure network device (router, etc.) is turned on. If printer or network device is off: Turn on printer or network device.
Page 340: Checking Pc Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network.
Page 341: Cannot Find Printer On Check Printer Settings Screen During Wireless Lan Setup (Windows)-Checking Printer's Wireless Lan Settings
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Printer's Wireless LAN Settings Is printer set to allow wireless communication? Make sure the icon is displayed on the touch screen. If icon is not displayed: The printer is not set to allow wireless communication. Turn on wireless communication on the printer. If icon is displayed: Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)- Checking Wireless LAN Environment...
Page 342: Cannot Find Printer On Check Printer Settings Screen During Wireless Lan Setup (Windows)-Checking Wireless Lan Environment
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Wireless LAN Environment Is printer connected to wireless router? Use the icon on the touch screen to make sure the printer is connected to the wireless router. icon is displayed: •...
Page 343 Important • Depending on the wireless router, note that different SSID is assigned for a bandwidth (2.4 GHz or 5 GHz) or its usage (for PC or game machine) using alphanumeric characters at the end of SSID. Check the SSID of the wireless router for the printer on the touch screen. Tap the icon on the lower left, select Yes, and then check SSID.
Page 344: Checking Printer's Ip Address
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device.
Page 345: Cannot Find Printer On Check Printer Settings Screen During Wireless Lan Setup (Windows)-Checking Security Software Settings
• If no message appears: Cancel the setup, and then set the security software to allow Canon software to access the network. The file Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder on the Setup CD-ROM After setting the security software, redo the network communication setup from the beginning.
Page 346: Cannot Find Printer On Check Printer Settings Screen During Wireless Lan Setup (Windows)-Checking Wireless Router Settings
Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup (Windows)-Checking Wireless Router Settings Check wireless router settings. Check wireless router network connection settings, such as IP address filtering, MAC address filtering, encryption key, and DHCP function. Make sure the same radio channel is assigned to the wireless router and the printer. To check the settings of the wireless router, see the instruction manual supplied with the wireless router or contact the manufacturer.
Page 347: Cannot Proceed Beyond Printer Connection Screen
Cannot Proceed beyond Printer Connection Screen If you cannot proceed beyond the Printer Connection screen, check the following. Make sure USB cable is securely plugged in to printer and computer. Check1 Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer.
Page 348 4. Turn off printer. 5. Restart computer. 6. Make sure you have no application software running. 7. Perform setup on web page. Note • You can use the Setup CD-ROM to redo setup. • For Mac OS: 1. Click Next. ◦...
Page 349: Cannot Find Printer While Using Wireless Lan
Cannot Find Printer while Using Wireless LAN Make sure the printer is turned on. Check1 Check the (Network status) icon on the touch screen. Check2 If the icon is displayed, wireless LAN is disabled. Select Active on WLAN active/inactive in Wireless LAN under LAN settings. If the icon is displayed, see Check 3 or later checking items to make sure whether printer setup is complete or the settings of wireless router to connect are correct.
Page 350 Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 351 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 352: Network Connection Problems
Network Connection Problems Printer Suddenly Cannot Be Used Network Key Unknown Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings...
Page 353: Printer Suddenly Cannot Be Used
Printer Suddenly Cannot Be Used Cannot Communicate with Printer Following Network Settings Change Cannot Communicate with Printer via Wireless LAN Cannot Communicate with Printer Using Wireless Direct Cannot Print, Scan, or Fax from a Computer Connected to the Network Cannot Communicate with Printer Following Network Settings Change It may take a while for the computer to obtain an IP address, or you may need to restart your computer.
Page 354 To check the settings of the wireless router, refer to the instruction manual provided with it or contact its manufacturer. To check the current network settings of the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Page 355 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 356 Make sure wireless LAN is enabled on your device. For details, refer to your device's instruction manual. Make sure printer is selected as connection for device (e.g. smartphone or Check4 tablet). Select the identifier for Wireless Direct (SSID) specified for the printer as the connection destination for devices.
Page 357 If MP Drivers are not installed, install them. (Windows) Check2 Install the MP Drivers using the Setup CD-ROM or install them from the Canon website. Make sure wireless router does not restrict which computers can access it. Check3 For more on connecting to and setting up your wireless router, see the wireless router instruction manual or contact its manufacturer.
Page 358: Network Key Unknown
Network Key Unknown WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect Setting an Encryption Key WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect For more on setting up a wireless router, see the instruction manual provided with the wireless router or contact its manufacturer.
Page 359 Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is compatible with WPA/WPA2, you can also use WPA2 or WPA. • Using WPA/WPA2 The authentication method, passphrase, and dynamic encryption type must be the same for the wireless router, the printer, and your computer.
Page 360: Printer Cannot Be Used After Replacing Wireless Router Or Changing Its Settings
Printer Cannot Be Used After Replacing Wireless Router or Changing Its Settings When you replace a wireless router, redo the network setup for the printer. • For Windows: Perform setup using the Setup CD-ROM or from the web page. • For Mac OS: Perform setup from the web page.
Page 361 If filtering MAC addresses or IP addresses at wireless router, check that MAC Check2 addresses or IP addresses for computer, network device, and printer are registered. If using WPA/WPA2 or WEP key, make sure encryption key for computer, Check3 network device, and printer matches key set for wireless router. Not only the WEP key itself, but also the key length, key format, the key ID to use, and the authentication method must be the same for the printer, the wireless router, and the computer.
Page 362: Other Network Problems
Other Network Problems Checking Network Information Restoring to Factory Defaults...
Page 363: Checking Network Information
• Print the network settings. Printing Network Settings For Windows, you can check the network setting information on the computer screen. Canon IJ Network Device Setup Utility Screen You can display the printer's MAC address on the touch screen. System information Checking Computer IP Address or MAC Address To check the IP Address or MAC address of your computer, follow the instructions below.
Page 364 Make sure Wi-Fi is selected as network interface. 3. Check the IP address or MAC address. Click TCP/IP to check the IP address. Click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place.
Page 365 3 packets transmitted, 3 packets received, 0% packet loss If packet loss is 100%, communication is not taking place. Otherwise, computer is communicating with target device. Checking Network Setting Information To check the printer's network settings information, print out the network settings information or use the operation panel to display it.
Page 366: Restoring To Factory Defaults
Restoring to Factory Defaults Important • For Windows: Initialization erases all network settings on the printer, making printing, scanning, or faxing operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, redo setup using the Setup CD-ROM or from the web page.
Page 367: Printing Problems
Printing Problems Printing Does Not Start No Ink Comes Out Paper Does Not Feed Properly/"No Paper" Error Print Results Are Unsatisfactory...
Page 368: Printing Does Not Start
Printing Does Not Start Make sure printer is securely plugged in and press ON button to turn it on. Check1 The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Note •...
Page 369 The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box. Note • To make the printer the one selected by default, select Set as Default Printer.
Page 370: No Ink Comes Out
24 hours later. • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Page 371: Paper Does Not Feed Properly/"No Paper" Error
Paper Does Not Feed Properly/"No Paper" Error Make sure paper is loaded. Check1 Loading Paper When loading paper, consider the following. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •...
Page 372 If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.
Page 373 Are transport unit cover and rear cover attached properly? Check9 Rear View for the positions of the transport unit cover and the rear cover. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 374: Print Results Are Unsatisfactory
Print Results Are Unsatisfactory If the print results are unsatisfactory due to white streaks, misaligned lines, or uneven colors, check the paper and print quality settings first. Do page size and media type settings match size and type of loaded paper? Check1 If these settings do not match, it is not possible to obtain the proper result.
Page 375 See also the sections below: Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear Lines Are Misaligned Paper Is Smudged / Printed Surface Is Scratched Cannot Complete Printing Vertical Line Next to Image Part of Page Is Not Printed (Windows) Lines Incomplete or Missing (Windows) Images Incomplete or Missing (Windows) Ink Blots / Paper Curl...
Page 376: Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear
Paper Is Blank/Printing Is Blurry/Colors Are Wrong/White Streaks Appear Printing Is Blurry Colors Are Wrong...
Page 377 White Streaks Appear Check paper and print quality settings. Check1 Print Results Are Unsatisfactory Check status of ink tanks. Replace ink tank if ink has run out. Check2 Replacing Ink Tanks Is orange tape or protective film still on ink tank? Check3 Make sure all the protective film is peeled off to expose the Y-shaped air hole, as shown below (A).
Page 378 • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair. When using paper with one printable surface, check the correct printable side Check5 of the paper.
Page 379: Lines Are Misaligned
Lines Are Misaligned Check paper and print quality settings. Check1 Print Results Are Unsatisfactory Perform print head alignment. Check2 If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 380: Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check paper and print quality settings. Check1 Print Results Are Unsatisfactory Check paper type. Check2 Make sure you are using the right paper for what you are printing. Supported Media Types Correct curl before loading paper.
Page 381 1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing.
Page 382 Opening Printer Driver's Setup Screen 3. Click Maintenance tab and Custom Settings. 4. Select Prevent paper abrasion check box and click OK. ◦ For Mac OS: Adjust the setting to prevent paper abrasion from Remote UI. Opening Remote UI for Maintenance If intensity is set high, reduce intensity setting and try printing again.
Page 383 Set longer ink drying time. Check10 This allows the printed surface to dry, preventing smudges and scratches. • For Windows: 1. Make sure printer is turned on. 2. Open printer driver setup window. Opening Printer Driver's Setup Screen 3. Click Maintenance tab and Custom Settings. 4.
Page 384: Vertical Line Next To Image
Vertical Line Next to Image Is loaded paper size correct? Check If the loaded paper is larger than the size you specified, a vertical line may appear in the margin. Set the paper size to match the loaded paper. Print Results Are Unsatisfactory Note •...
Page 385: Scanning Problems (Mac Os)
Scanning Problems (Mac OS) Scanning Problems...
Page 386: Scanning Problems
Scanning Problems Scanner Does Not Work Scanner Driver Does Not Start...
Page 387: Scanner Does Not Work
Scanner Does Not Work Make sure that your scanner or printer is turned on. Check 1 With network connection, check the connection status and reconnect as Check 2 needed. With USB connection, connect the USB cable to a different USB port on the Check 3 computer.
Page 388: Scanner Driver Does Not Start
Scanner Driver Does Not Start Make sure the application software supports AirPrint. Check 1 Select your scanner or printer on the application's menu. Check 2 Note • The operation may differ depending on the application. Scan and save images with IJ Scan Utility Lite and open the files in your Check 3 application.
Page 389: Faxing Problems
Faxing Problems Problems Sending Faxes Problems Receiving Faxes Telephone Problems...
Page 390: Problems Sending Faxes
Problems Sending Faxes Cannot Send a Fax Errors Often Occur When You Send a Fax...
Page 391: Cannot Send A Fax
Cannot Send a Fax Is power turned on? Check1 • You cannot send faxes if the power is turned off. Press the ON button to turn the power on. • If you unplugged the power cord without turning off the power (the ON lamp is lit), reconnecting it turns on the power automatically.
Page 392 FAX settings Is Dial tone detect set to ON? Check6 Resend the fax after a while. If you still cannot send the fax, select OFF for Dial tone detect in Advanced FAX settings under FAX settings. FAX settings Is fax number registered correctly in printer's directory? Check7 Check the recipient's fax/telephone number, correct the fax/telephone number registered in the printer's directory, and then send the document again.
Page 393 If the telephone line is connected correctly, there is a problem with your telephone line. Contact your telephone company and the manufacturer of your terminal adapter or telephone adapter.
Page 394: Errors Often Occur When You Send A Fax
Errors Often Occur When You Send a Fax Check telephone line condition or connection. Check If errors occur frequently when using an Internet telephone, it is possible that they can be reduced by selecting Reduce for Error reduction setting (VoIP) on Advanced FAX settings under FAX settings. For details, see Error reduction setting (VoIP).
Page 395: Problems Receiving Faxes
Problems Receiving Faxes Cannot Receive a Fax, Cannot Print a Fax Quality of Received Fax is Poor...
Page 396: Cannot Receive A Fax, Cannot Print A Fax
Cannot Receive a Fax, Cannot Print a Fax Is the power turned on? Check1 • You cannot receive faxes if the power is turned off. Press the ON button to turn the power on. • If you unplugged the power cord without turning off the power (the ON lamp is lit), reconnecting it turns on the power automatically.
Page 397 Is telephone line cable connected to external device jack? Check4 Reconnect it to the telephone line jack. Connecting Telephone Line Is a different size of paper from that specified by Page size in FAX paper Check5 settings loaded? If a different size of paper from that specified by Page size is loaded for printing faxes, the received faxes will not be printed and will be stored in the printer's memory (Memory Reception).
Page 398 For details on how to set, see Rejecting Fax Reception. Are there setting items set Reject in Caller rejection? Check10 If you select Reject for any setting items in Caller rejection in Security control under FAX settings, the printer rejects calls for setting item selected Reject. For details on how to set, see Using Caller ID Service to Reject Calls.
Page 399: Quality Of Received Fax Is Poor
Quality of Received Fax is Poor Check scan settings of sender's fax device. Check1 Ask the sender to adjust the scan settings of the fax device. Is ECM RX set to OFF? Check2 Select ON for ECM RX in Adv. communication settings in Advanced FAX settings under FAX settings. If ECM RX is enabled, the sender's fax device resends the fax after correcting errors automatically.
Page 400: Telephone Problems
Telephone Problems Cannot Dial Telephone Disconnects During a Call...
Page 401: Cannot Dial
Cannot Dial Is telephone line cable connected correctly? Check1 Check that the telephone line cable is connected correctly. Connecting Telephone Line Is telephone line type of printer or external device set correctly? Check2 Check the telephone line type setting and change it as necessary. Setting Telephone Line Type...
Page 402: Telephone Disconnects During A Call
Telephone Disconnects During a Call Is telephone line cable or telephone (or a peripheral device such as an external Check telephone, an answering machine, or a computer modem) connected correctly? Check that the telephone line cable and the telephone (or a peripheral device such as an external telephone, an answering machine, or a computer modem) are connected correctly.
Page 403: Mechanical Problems
Mechanical Problems Power Does Not Come On Power Shuts Off By Itself USB Connection Problems Cannot Communicate with Printer via USB Touch Screen Shows Wrong Language...
Page 404: Power Does Not Come On
Make sure power plug is securely connected to printer, and then turn it back on. Check2 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn it Check3 on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 405: Power Shuts Off By Itself
The setting to shut off the power automatically is disabled. • To disable the setting from the computer: For Windows, use Canon IJ Printer Assistant Tool or ScanGear (scanner driver) to disable the setting. Follow the procedure below to disable the setting using Canon IJ Printer Assistant Tool.
Page 406: Usb Connection Problems
USB Connection Problems Printing or Scanning Is Slow/Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Appears (Windows) If your system environment does not support Hi-Speed USB, the printer operates at the slower speed of USB 1.1. In this case, the printer works properly but printing or scanning speed may slow down due to the communication speed.
Page 407: Cannot Communicate With Printer Via Usb
Cannot Communicate with Printer via USB Make sure printer is turned on. Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing RIGHT. For details, refer to the instruction manual supplied with the USB cable.
Page 408: Installation And Download Problems
Installation and Download Problems Cannot Install MP Drivers (Windows) Updating MP Drivers in Network Environment (Windows)
Page 409: Cannot Install Mp Drivers (Windows)
CD-ROM icon in the window that appears. If the contents of the CD-ROM appear, double-click MSETUP4.EXE. If you cannot install the MP Drivers with the Setup CD-ROM, install them from the Canon website. Note • If the CD-ROM icon does not appear, try the following: •...
Page 410 MP Drivers. Deleting the Unnecessary MP Drivers Reinstall the MP Drivers with the Setup CD-ROM or install them from the Canon website. Note • If the installer was stopped due to a Windows error, Windows operation may be unstable, and you...
Page 411: Updating Mp Drivers In Network Environment (Windows)
Updating MP Drivers in Network Environment (Windows) Download the latest MP Drivers. Download the latest MP Drivers for your model on the download page of the Canon website. Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that you downloaded.
Page 412: Errors And Messages
Errors and Messages An Error Occurs Message (Support Code) Appears...
Page 413: An Error Occurs
An Error Occurs If an error occurs in printing, for example if the paper runs out or jams, an error message appears on the computer screen and the touch screen. When a Support Code and a message are displayed on the computer screen (Windows): When a Support Code and a message are displayed on the touch screen: A support code and action for the error appears on the touch screen.
Page 414: Message (Support Code) Appears
Message (Support Code) Appears This section describes some of the errors and messages that may appear. Note • A support code (error number) is displayed on the computer for some errors. For details on errors that have support code, see List of Support Code for Error.
Page 415 After selecting OK, the list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed. For details, refer to Summary of Reports and Lists. • Cannot connect to the server. Please wait a while and try again. The printer cannot connect to the server due to a communication error.
Page 416 Check3 Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and reinstall them from the Setup CD-ROM or the Canon website. When printer is connected to your computer with a USB cable, check device Check4 status from your computer.
Page 417 Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed (Windows) If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a screen appears asking for permission to send the printer and application usage information every month for about ten years. Read the information on the screen and follow the instructions below. •...
Page 418 If you are logged in on an account with administrator privileges, follow the on-screen instructions. 2. Select Canon Inkjet Printer/Scanner/Fax Extended Survey Program. 3. Select Change. If you select Yes after you have followed the on-screen instructions, the confirmation screen will appear at the time of the next survey.
Page 419 • If you agree to participate in survey program: Click Agree and follow the on-screen instructions. The printer usage information is sent via the Internet. Once you have completed the procedure, the information is subsequently sent automatically and the confirmation screen does not reappear. Note •...
Page 420 2. Select Applications from Go menu of Finder, double-click the Canon Utilities folder and Inkjet Extended Survey Program folder. 3. Move Canon Inkjet Printer/Scanner/Fax Extended Survey Program.app to Trash. 4. Restart computer. Empty Trash and restart your computer. • Changing setting: To display the confirmation screen every time the printer usage information is sent or to resume surveying, follow the procedure below.
Page 421: List Of Support Code For Error
List of Support Code for Error Support code appears on the touch screen and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the touch screen and computer screen and take the appropriate action in response.
Page 422 • 6000 to 6ZZZ 6000 6001 6004 6500 6502 6800 6801 6830 6831 6832 6833 6900 6901 6902 6910 6911 6930 6931 6932 6933 6936 6937 6938 6939 693A 6940 6941 6942 6943 6944 6945 6946 6951 6A80 6A81 • 8000 to 8ZZZ 8300 •...
Page 423: List Of Support Code For Error (Paper Jams)
List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below. • If you can see the jammed paper at the paper output slot or the rear tray: ◦ If the paper fed from the rear tray is jammed: 1300 •...
Page 424 1300 Cause Paper is jammed when feeding paper from rear tray. What to Do If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from the rear tray following the instructions below. Important •...
Page 425 • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 426 1303 Cause Paper is jammed when feeding paper from cassette. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 427 2. Press down lock (B) on cassette. 3. Pull cassette back and forth while holding down lock (B). Loading Paper in the Cassette 2. Perform printing or copying again.
Page 428 1304 Cause Paper is jammed when performing automatic duplex printing. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 429 2. Press down lock (B) on cassette. 3. Pull cassette back and forth while holding down lock (B). Loading Paper in the Cassette 2. Perform printing or copying again.
Page 430 1313 Cause Paper is jammed as printer pulled in printed paper. What to Do If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following locations. • Paper output slot 1300 •...
Page 431: Paper Is Jammed Inside Printer
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper from the paper output slot, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Important • The printer cannot be turned off while it is sending or receiving a fax, or when the received fax or the unsent fax is stored in the printer's memory.
Page 432 3. Check if jammed paper is under print head holder. If the jammed paper is under the print head holder, move the print head holder to the far right or left, whichever makes it easier to remove the paper. When moving the print head holder, hold the top of the print head holder and slide it slowly to the far right or left.
Page 433 Check the printer again for any remaining bits of paper. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 434: Removing Jammed Paper From Rear Side
Removing Jammed Paper from Rear Side Important • The printer cannot be turned off while it is sending or receiving a fax, or when the received fax or the unsent fax is stored in the printer's memory. Turn off the printer after making sure it has completed sending or receiving all the faxes. Do not unplug when turning off the printer.
Page 435 4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1.
Page 436 2. Slowly pull out paper. Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover.
Page 437 Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 438 1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. •...
Page 439 1003 Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. • Align the paper guides with the both edges of the paper when you load paper in the cassette. •...
Page 440 1200 Cause Scanning unit/cover is open. What to Do Close the scanning unit / cover and wait for a while. Do not close it while you are replacing an ink tank.
Page 441 What to Do Turn off the printer and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 442 1600 Cause Ink may have run out. What to Do Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, tap OK on the printer with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.
Page 443 1660 Cause The ink tank cannot be recognized. What to Do Printing cannot be performed because the ink tank is not installed or is not compatible with this printer. Check the ink tank. If you want to cancel printing, press the printer's Stop button.
Page 444 With this operation, disabling the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
Page 445 With this operation, disabling the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition or by using refilled ink tanks.
Page 446 Cause Ink absorber is almost full. What to Do Select OK on the touch screen to continue printing. Contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 447 Open the scanning unit / cover and make sure the tape for securing the print head holder during transportation has been removed. If the tape is still there, remove it and close the scanning unit / cover. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 448 2110 Cause Paper settings for printing or copying do not match cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the touch screen. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 449 What to Do Select OK on the touch screen again to display the screen below. Select the appropriate action. Note • Depending on settings, some of the options below may not appear. Print with the loaded paper. Select this option to print or copy onto the paper in the cassette without changing the paper settings. For example, if the print or copy paper setting is A5, and cassette paper information is set to A4, the A5 size setting is used to print or copy onto the paper in the cassette.
Page 450 • To change the message view setting when printing or copying using the operation panel of the printer: Feed settings • To change the message view setting when printing using the printer driver: Changing the Printer Operation Mode (Windows) Changing the Printer Operation Mode (Mac OS)
Page 451 2900 Cause Scanning print head alignment sheet failed. What to Do Select OK on the printer's touch screen and check the following. • Make sure the print head alignment sheet is set in the correct position and orientation on the platen glass.
Page 452 2901 Cause Print head alignment pattern has been printed and printer is waiting to scan sheet. What to Do Scan the printed alignment pattern. 1. Load print head alignment sheet on platen glass. Place the printed side down and align the mark in the bottom right corner of the sheet with the alignment mark 2.
Page 453 4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Then change the print settings and retry printing.
Page 454 Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 455 Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 456 Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • When clearing an impediment to print head holder motion, be careful not to touch white belt (A).
Page 457 Turn off printer and unplug it. After a while, plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 458 5B00 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
Page 459 Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Page 460 Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • When clearing an impediment to print head holder motion, be careful not to touch white belt (A).

This manual is also suitable for:

Pixma tr7500 series Pixma tr7560 Pixma tr7550 Pixma tr7540 Pixma tr7530 Pixma tr7520

Canon Pixma TS7520 Online Manual

Quick Links

Related Manuals for Canon Pixma TS7520

Summary of Contents for Canon Pixma TS7520