Frequently Asked Questions - Canon TA-30 Online Manual

Frequently Asked Questions

General FAQ
I want to easily create vertical or horizontal banners
Does this printer support sub-ink tank system
I want to know how to configure roll cutting
I want to configure so that the roll is cut automatically after waiting for the ink to dry
How do I print without borders
I want to know the paper types that can be used in this printer
The paper type that I want to print is not displayed on the Touch Screen
Can I perform duplex printing
I want to perform enlargement printing
Network Settings and Common Problems
Solve Problems
Problems Regarding Paper
Remove Jammed Roll Paper
Remove a Jammed Sheet
Remove Jammed Paper (Paper Feed Slot)
Roll paper cannot be inserted into the Paper Feed Slot
Roll Paper Remains/Lacks under Quantity Management
Cannot load sheets
Paper is not cut straight
Paper is not cut
Cutter Blade Does Not Work While Cutting Is in Progress
Dent in the Tip of Paper
The size of clear film cannot be detected
Printer Keeps Ejecting the Roll Paper
Margins are wide
When printing on roll paper, the printed surface becomes scratched
Printing Does Not Start
Printer Suddenly Stopped Working for Some Reason
The Data lamp on the Operation Panel does not light up
The printer does not respond even if print jobs are sent
"Preparing the ink system." is displayed
"Agitating the ink" is displayed
The Printer Stops During a Print Job
Printing stops and an error message is displayed
The printer ejects blank, unprinted paper
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
661