Changeable Setting Items Using Web Browser - Canon TA-30 Online Manual

Hide thumbs Also See for TA-30:

Table of Contents

Changeable Setting Items Using Web Browser

• The items described here and the items displayed in the web browser may differ in display order.

• The item which can be used is different in administrator mode or in standard user mode.

Items for Security

Security (Item for administrator)

This function allows you to specify the password, the standard user mode settings, the operation

restrictions, and SSL/TLS settings of certificate for encrypted communication.

For details on setting password, see

Operation panel lock (Item for administrator)

Select this item from Custom settings on Device settings.

Selecting Enable disables any operations using the operation panel.

A message informing you that operations are invalid appears when you tap the touch screen. An

error or warning is displayed even while this function is enabled.

Items for Maintenance/Management

This function allows you to set and execute the printer utility functions such as cleaning.

Job management

This function allows you to display the job history and print it. In addition, you can delete jobs from

• When you are logging on in administrator mode, you can restrict this function in standard user

System info and LAN settings

This function allows you to check the system information and to change the LAN settings.

Using IP filtering in Advanced setup in LAN settings, you can permit or refuse the connection of a

specific IP address for IPv4 address or IPv6 address.

Using SNMP settings in Advanced setup in LAN settings, you can specify the SNMP and MIB

setting to management the printer via a network.

• If you have refused the IP address of administrator's device using IP filtering by mistake, reset

LAN settings of the printer. To reset LAN settings, select System info and LAN settings > LAN

settings > Advanced setup > Reset LAN settings, and then select Yes.

If you place a check mark of Enable HTTPS redirection in CHMP settings in Advanced setup in

LAN settings, it becomes possible to authenticate the communication partner and encrypt the

communication data by HTTPS communication.