Canon TA-30 Online Manual page 152

◦ Enable/disable Wi-Fi
Select Enable to wirelessly connect via wireless router.
◦ Wi-Fi setup
Select how to setup Wi-Fi.
■ Easy wireless connect
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
■ Manual connect
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
■ WPS (Push button method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
■ Other connection types
■ Manual connect (adv.)
Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.
■ WPS (PIN code method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Note
• By tapping Advanced, you can set LAN in detail.
For the items that can be set, see the following.
Advanced
• Wireless Direct
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Connection
Network (SSID)/device name
Password
Communication mode
Channel
Wi-Fi security
IPv4 address
IPv4 subnet mask
Setting
Enabled (connected) / Enabled (disconnected) / Disa-
ble
DIRECT-XXXX-TA-30
XXXXXXXXXX (10 characters)
Wireless Direct
3
WPA2-PSK (AES)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
152