Color Mode - Canon TA-30 Online Manual

Color mode

Lets you specify the color(s) to use when printing HP-GL/2 data.
This setting item is displayed by tapping in the following order.
(Setup) > Device settings > Print settings > HP-GL/2 print settings > Print quality settings
• Color (perceptual)
◦ If you select Line drawing for Print target:
Reproduces colors of general images naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
◦ If you select Photo for Print target:
Reproduces colors of general photos naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
• Color (saturation) (Initial setting)
◦ If you select Line drawing for Print target:
Prints in easy-to-see colors suitable for line drawing.
◦ If you select Photo for Print target:
Reproduces vivid colors on data such as a poster.
• Color (correct off)
Performs printing without color matching.
• Monochrome
◦ If you select Line drawing for Print target:
Select this setting to print a line drawing using black ink.
◦ If you select Photo for Print target:
Prints color data converting to monochrome. Continuous tones are reproduced using gray halftones.
• Monochrome BMP
The colors other than white are printed in black.
171