Enlarge/Reduce (Scaling) And Auto Rotation - Canon TA-30 Online Manual

Hide thumbs Also See for TA-30:

Table of Contents

Enlarge/Reduce (Scaling) and Auto rotation

When both Enlarge/Reduce (Scaling) and Auto rotation are specified, Enlarge/Reduce (Scaling) is done

first and then Auto rotation is done to determine if printing is possible.

Printing is done without Auto rotation if the size of the image after doing Enlarge/Reduce (Scaling) would

cause the image to run off the edge of the paper were Auto rotation executed.

Enlarge/Reduce (Scaling) AND Auto rotation EXAMPLE

Print data (image drawing range)

• Printed image with Enlarge/Reduce (Scaling) only.

• Printed image when the image runs off the edge of paper.

Auto rotation is not performed.