Commissioning
Table 11: Push button caps and label
Options
Description
C9900-Z255
Blue push button cap for individual application to a pushbutton extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z256
Yellow push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z257
Green push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z258
Red push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z259
Clear push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z290
Orange push button cap for individual application to a push button extension C9900-
G0xx, type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z495
Black push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z496
Gray push button cap for individual application to a push button extension C9900-G0xx,
type Rafi FS+, diameter: 22.3 mm, 5 pcs
C9900-Z260
Transparent film for individual labeling of a C9900-G0xx- push button extension, type Rafi
FS+, diameter: 22.3 mm, 1 sheet DIN A4, 54 pcs
To replace the push button caps and insert the labeled foils, follow the steps below, shown in Figure 21:
1. Insert a screwdriver under the push button cap and pry it out (section A and B).
2. Replace the removed push button cap with a new one if necessary.
3. Insert the foil into the removed or exchanged push button cap. The nose on the front of the push button
cap indicates the top of the push button (section C).
4. Insert the push button cap into the push button (section D).
5. Press the push button cap into the push button until you hear a "click".
ð You have replaced the push button cap and labeled it if necessary.
30
Version: 2.0
C9900-G00x and C9900-G02x