For Your Safety; Signal Words; Intended Use - Beckhoff C9900-G00 Series Manual

For your safety

2 For your safety
The Safety chapter first explains the safety symbols used in the documentation and their meanings. They
contain fundamental safety instructions that are essential for the avoidance of personal injuries and damage
to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1

Signal words

The signal words used in the documentation are classified below.
Warning of personal injuries
Hazard with high risk of death or serious injury.
Hazard with medium risk of death or serious injury.
There is a low-risk hazard that can result in minor injury.
Warning of property and environmental damage
There is a possibility of damage to the environment, equipment or data.
2.2

Intended use

The push button extensions C9900-G00x and C9900-G02x enable the application-specific arrangement of
electromechanical illuminated push buttons directly on the operating unit of a CP2xxx or CP39xx Control
Panel. It enables precise adaptation of the control panel to the machine control requirements. The push
button extensions are mounted ex factory.
The specified limits for technical data must be adhered to.
The push button extensions can be used within the documented operating conditions.
Improper use
Do not use the push button extension outside the documented operating conditions.
6
DANGER
WARNING
CAUTION
NOTICE
Version: 2.0 C9900-G00x and C9900-G02x