Appendix Hconversion Instructions For Fenwalnet 2000; Introduction; Fenwalnet 2000 Control Unit Retrofit Kit; Conversion Parts - UTC Fire and Security FenwalNET 8000-ML Installation, Operation And Maintenance Manual

CONVERSION INSTRUCTIONS FOR FENWALNET 2000
H-1

INTRODUCTION

This appendix provides instructions on how to convert a FenwalNET
fully-functional 2-Tiered FenwalNET 8000-ML
2000 enclosure.
H-2

FENWALNET 2000 CONTROL UNIT RETROFIT KIT

This procedure requires the purchase of one FenwalNET 2000 Control Unit Retrofit Kit
(P/N 74-800400-001) for each FenwalNET 2000 control unit to be retrofitted. The retrofit kit consists
of both conversion parts and operational parts.
H-2.1

Conversion Parts

The following parts are needed to convert the enclosure:
P/N 06-237041-001
APPENDIX H
Part Name
base plate
base plate bracket
replacement door
installation hardware
Conversion Instructions for FenwalNET 2000
TM
control unit, housed in the existing FenwalNET
Illustration
• #6 nuts (4)
• #8 nuts (2)
• #10 nut (1)
• self-threading screws (2)
• #8 machine screw/nut
H-1
TM
2000 control unit into a
February 2011