Appendix Ffenwalnet 8000-Ml For Canadian Applications; Canadian Application-Style Enclosures - UTC Fire and Security FenwalNET 8000-ML Installation, Operation And Maintenance Manual

FENWALNET 8000-ML FOR CANADIAN APPLICATIONS
F-1

CANADIAN APPLICATION-STYLE ENCLOSURES

The FenwalNET 8000-ML
divided into two or three tiers and provides room to house the Power Supply/PMU Assembly, Main
Controller Board, Keypad/Display, integrated LED Annunciator, Expansion Card Cage and two
batteries (up to 17-AH each). Either system can be expanded by adding one or more Expansion
Enclosures. The FenwalNET 8000-ML for Canadian Applications is operated in the same manner as
the standard FenwalNET 8000-ML (as described in this manual).
The Canadian Application is similar to the standard Main Enclosure, with the following exceptions:
• A second (dead) front panel is included to prevent accidental operator exposure to AC voltages
and access to internal electronics as required by ULC-S527-99. The dead front cover is
constructed of the same steel and matching color as the FenwalNET 8000-ML and is installed
between the front door and its internal components. With the dead front cover installed, an
operator has access to the front Keypad/Display and LED Annunciator only.
• An integrated LED Annunicator is included on the front of the panel beneath the Keypad/Display.
Optionally, the LED Annunciator can be housed inside the Remote Enclosure. (A blanking plate
will be substituted on the front panel if the LED Annunciator is not integrated).
(a) Control Unit with Integrated LED Annunciator
Figure F-1. 3-Tiered Canadian Application Enclosures (shown with Enlosure Door removed)
P/N 06-237041-001
FenwalNET 8000-ML For Canadian Applications
APPENDIX F
TM
enclosure for Canadian Applications (Figure F-1 and Figure F-2) is
F-1
(b) Control Unit with Blanking Plate
February 2011