Glossary - KEB COMBILINE E6 Instructions For Use Manual

Glossary

Glossary
Application
The application is the intended use of the KEB
product.
COMBILINE
COMBILINE designates the product line of filter
technology at KEB.
COMBIVERT
Proper name for a KEB Drive Controller
Customer
The customer has purchased a product from KEB
and integrates the KEB product into his product
(customer product) or resells the KEB product (re-
seller).
EMC filter
EMC filters are used to suppress conducted inter-
ference emissions in both directions between the
drive controller and the mains.
EN 55017
Methods of measurement of the suppression char-
acteristics of passive EMC filtering devices
(CISPR 17:2011); German version EN
55017:2011
EN 60664-1
Insulation coordination for equipment within low-
voltage systems - Part 1:Principles, requirements
and tests (IEC 60664-1)
EN 60721-3-1
Classification of environmental conditions - Part
3-1: Classification of groups of environmental
parameters and their severities - Main section:
Long-term storage (IEC 60721-3-1)
EN 60721-3-2
Classification of environmental conditions - Part 3:
Classification of groups of environmental paramet-
ers and their severitiesMain section 2: Transporta-
tion and Handling (IEC 60721-3-2)
32
EN 60721-3-3
Classification of environmental conditions - Part 3:
Classification of groups of environmental paramet-
ers and their severitiesMain section 3: Stationary
use at weatherprotected locations (IEC
60721-3-3)
EN 61800-3
Adjustable speed electrical power drive sys-
tems.Part 3:EMC requirements and specific test
methods (VDE 0160-103, IEC 61800-3)
EN 61800-5-1
Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements - Electrical, thermal
and energy requirements (VDE 0160-105-1, IEC
61800-5-1)
Fuse Class J
Class J fuses have UL approval for use in branch
circuit protection and in the feeder circuit.
Fuse type aR
Partial range fuse: short-circuit protection for
semiconductor devices (ultrafast). Overload pro-
tection must be realised otherwise.
Fuse type gG
Full-range fuse: Standard type general applica-
tion, mainly used for cable and line protection
(medium-blow).
Fuse type gR
Full range fuse for semiconductor devices (ultra-
fast).
NHN
Standard altitude zero; related to the established
height definition in Germany (DHHN2016). The in-
ternational data usually deviate from this by only a
few cm to dm, so that the value is given can be
taken from the regionally applicable definition.
PDS
Power drive system incl. motor and measuring
probe
ma_dr_e6-hf-filter-nb-20337731_en
KEB Automation KG