Interference Suppression Level; Insertion Loss; Fig. 2 33E6T60-3150_Attenuation; Tab. 3 Fuse Protection According To Ul Type Gr / Ar - KEB COMBILINE E6 Instructions For Use Manual

4.2.4 Interference suppression level
Filter
Interference voltage (limit class
Rated switching frequency
Maximum motor cable length (low-capacity)
Tab. 4: Interference suppression level 33E6T60-3150
4.2.5 Insertion loss
d
a
Fig. 2: 33E6T60-3150_attenuation
a Asymmetrical insertion loss (Common Mode)
c Symmetrical insertion loss (0.1Ω/100Ω system)
ma_dr_e6-hf-filter-nb-20337731_en
The following table shows the maximum fuse size of the type
1:1 dimensioning and an input voltage of 480 V. In case of other dimension-
ing, the values must be designed for the current and the
downstream drive controller. The marks approved for UL are depending on
the connected drive controller and are described there accordingly.
12E6T60-3000
Tab. 3: Fuse protection according to UL type gR / aR
To comply with the required limit class the specified motor cable length must not be ex-
ceeded, depending on the switching frequency.
EN 61800-3)
Measurement results of the insertion loss in accordance with
Technical data | 4
SCCR 30kA
in Vorbereitung
33E6T60-3150
C2 (C3)
2 kHz 4 kHz
100 m 50 m (100 m)
b Unsymmetrical insertion loss (Differential Mode)
d Symmetrical insertion loss (100Ω/0.1Ω system)
gR / aR with a
SCCR rating of the
SCCR 100kA
in Vorbereitung
8 kHz
100 m
EN 55017.
f / MHz
15