Impres™ Battery Annunciator; Accessing The Battery Info Screen - Motorola ASTRO APX 4000 Model 2 User Manual

Three variations of smart PTT are available:
Mode
Transmit Inhibit
You cannot transmit if any traffic is
on Busy Channel
detected on the channel.
with Carrier
You cannot transmit on an active
Transmit Inhibit channel with a squelch code or
on Busy Channel (if secure-equipped) encryption key
with Wrong other than your own. If the PL code is
Squelch Code the same as yours, the transmission is
not prevented.
This feature can work in conjunction
with either of the two above variations.
Quick-Key You can override the transmit-inhibit
Override state by quick-keying the radio. In other
words, two PTT button presses within
the preprogrammed time limit.
Description
IMPRES™ Battery Annunciator
This feature displays the current capacity and charges cycles of
your battery when a IMPRES Battery is powering your radio.
This feature must be enabled in your radio to see the
information.
The information shown are:
•
Rated Capacity – Percentage of current battery capacity.
•
Remaining Capacity – Remaining power of the battery in
mAh.
•
Estimated Charges – Number of charges cycles the battery
has gone through.

Accessing the Battery Info screen

Procedure:
1 < >
or to Batt.
2
Press the Menu Select button directly below Batt. The
display shows the details of the battery.
3 U D
or to scroll through the various information.
OR
Press the Menu Select button directly below Exit to return
to the previous screen.
OR
H
Press to return to the Home screen.
105
English