Impres Battery Annunciator - Motorola SRX 2200 3.5 User Manual

Note:
If the user has disabled TX Inhibit via the
menu and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
The display shows Tx inhibit on. You hear a
sequence of short, low-high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant
short, low-pitched tone (reject tone).
Note:
The status of the Transmit Inhibit does not
change after the radio powers up.
Disabling Transmit Inhibition
Perform one of the following actions:
• Switch the preprogrammed Transmit Inhibit
switch to Transmit Inhibit disabled position.
•
or to TxIn. Press the Menu Select button
below TxIn.
• Press the Transmit Inhibit programmable
button.
176
English
Note:
If the user has disabled TX Inhibit via the
softkey and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high-low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.

IMPRES Battery Annunciator

This feature displays the current capacity and
charges cycles of your battery when an IMPRES
Battery is powering your radio. This feature must be
enabled in your radio to see the information.
The information shown are:
Charge
Percentage
Remaining
Capacity
Estimated
Charges
Percentage of current battery
capacity.
Remaining power of the battery
in mAh.
Number of charges cycles the
battery has gone through.
™