Benchmark 750-3000 Installation & Startup Manual
SECTION 2 – INSTALLATION
2.4.2 Setting the Unit
All Benchmark Boilers must be installed on a level housekeeping pad to ensure proper
condensate drainage. The pad thickness must be:
•
BMK 750 – 1000 – 4 to 6 inch (10.2 to 15.2 cm)
•
BMK 1500 – 3000 – 4 to 8 inch (10.2 to 20.3 cm)
If anchoring the unit, refer to the Figures below for anchor locations.
Figure 2-2a: BMK 750/1000 Anchor Bolt Locations
Figure 2-2b: BMK 1500/2000 Anchor Bolt Locations
•
•
OMM-115_D
GF-200
5/9/2019
•
All holes are flush with the bottom surface of the frame.
•
All dimensions shown are in inches [millimeters]
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
126
Page 17 of