Watts Aerco Benchmark OMM-0116 Installation And Start-Up Manual page 126

Benchmark 750-3000 Installation & Startup Manual
NOTES
Change Log:
Date Description
Rev C:
DIR 17-065: Changed minimum gas pressure for BMK 1500/2000
to 4' W.C. in Table 2-2, section 2.9.1
11/29/2017
DIR 17-080: Verified part numbers throughout the manual,
standardized C-More Controller naming convention.
Rev D:
DIR 18-02: Added Ultra-Low NOx values for BMK 1500 & 2000 in
Table 4-2
DIR 18-55: Changed Air Inlet Temp Sensor part number from
61024 to 123449 in Section 2.11.2. (Reference PIR 1542)
DIR 18-61: Updated Blower Proof Switch Test, Section 5.8.1.
DIR 18-65: Updated Tables 4-3 in Section 4.4.1 and Tables 4-6 in
Section 4.4.2
DIR 19-01: Corrected O
5/9/2019
DIR-19-04: Added additional requirements to Section 1.2:
Emergency Shutdown.
DIR 19-15: Modified requirement for that housekeeping pad must
be level in Section 2.4.2.
DIR 19-34: Revised description of I/O board's Analog Out terminals
in Section 2.11.8
DIR 19-38: All voltage requirements moved into the BMK Electrical
Power Guide, TAG-0048, GF-2060.
DIR 19-39: Corrected Table 3-5a, A/F Valve Position and Energy
Input, 50%, 60% and 70% values.
© AERCO International, Inc., 2019
• •
OMM-115_D GF-200 5/9/2019
values in Table 4-3b for BMK 1500/2000.
2
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
126
Changed By
Chris Blair
Chris Blair
Page 126 of