Macos Installation - StarTech.com 129N-USBC-KVM-DOCK Instruction Manual

macOS Installation

1. Navigate to:
www.StarTech.com/129N-USBC-KVM-DOCK
www.StarTech.com/129UE-USBC-KVM-DOCK
and click the Drivers/Downloads tab.
2. Under Driver(s), download the startechlink.zip file.
3. Double-click the zip folder that you downloaded, macOS will unzip the folder using
Archive Utility.
4. Open the StarTechLink_Mac folder, and double-click the
StarTech_ForMac(vx_xxx_xx..)(.pkg) installation package.
5. The Install StarTech.com Link installation prompt will open to the Introduction
section. Select the Continue button.
6. The Destination Select section will be displayed. Select the Continue button.
7. The Installation Type section will be displayed. Select the Install button.
Note: If a User Name/Password is required, Enter the User Name and Password
in the specified fields, and select Install Software. This will be the username and
a password of the macOS user account. The account must have administration
privileges to complete the installation.
8. The Host Bridge dialog box will appear, Select Open System Preferences.
9. The Security & Privacy prompt will open to the Privacy section. Select the
displayed next to "Click the lock to make changes".
Note: If a User Name/Password is required, Enter the User Name and Password in
the specified fields, and select Install Software.
10. Select StarTech.com Link from the list displayed below "Allow the apps below to
control your computer", and close the window.
11. Follow the on-screen prompts to complete the installation.
Instruction manual
or
5
icon