Making Calls; Audio Path Selection; Make Calls; Make A Call With The Speakerphone - Cisco 8841 User Manual

Making Calls

Audio Path Selection

When you make or receive a call, the audio path goes to the last device used by you, either the
handset, the headset, or the speakerphone. The following list describes each scenario:
Pick up the handset when you make or answer a call, and all of your calls are routed to your handset
until you select Headset
Select Headset when you make or answer a call, and all of your calls are routed to your
headset until you pick up the handset or select Speakerphone
If your administrator sets your headset as the audio path on your phone, then you can remove the
handset and use your headset. This is ideal for anyone who prefers the convenience of a headset.
But you must still select Headset the first time you handle a call.
Select Speakerphone
speakerphone until you pick up the handset or select Headset

Make Calls

Your phone works just like a regular phone. But we make it easier for you to make calls.
Use your phone just like any other phone to make a call.
Procedure
Enter a number and pick up the handset.

Make a Call with the Speakerphone

Use your speakerphone for hands-free calling. Keep in mind that your coworkers might be able to
hear your call too.
Procedure
Step 1 Enter a number using the keypad.
Step 2 Press Speakerphone

Make a Call with a Standard Headset

Use your headset for hands-free calling that won't disturb your coworker and gives you some
privacy.
Page 14 of 29
or Speakerphone
when you make or answer a call, and all of your calls are routed to your
.
.
.
.
Horizon | Cisco IP Phone 8841/8851 and 8861 User Guide
© Gamma 2016. All rights reserved. Confidential