Table of Contents
Advertisement
OPERATION
Power ON/OFF
Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
(located on the display panel) to turn on the unit.
Inverter Turn-on
After this inverter is turned on, WELCOME light show will be started with RGB LED BAR. It will slowly cycle
through entire spectrum of nine colors (Green, Sky blue, Royal blue, Violet, Pink, Red, Honey, Yellow, Lime
yellow) about 10-15 seconds. After initialization, it will light up with default color.
RGB LED BAR can light up in different color and light effects based on the setting of energy priority to
display the operation mode, energy source, battery capacity and load level. These parameters such as
color, effects, brightness, speed and so on can be configured through the LCD panel. Please refer to LCD
settings for the details.
Operation and Display Panel
The operation and the LCD module, shown in the chart below, includes six indicators, six function keys, on/off
switch and a LCD display to indicate the operating status and input/output power information.
Setting LED 1
Function keys
Setting LED 3
Indicators
LED Indicator
Setting LED 1
Setting LED 2
Setting LED 3
Status
indicators
Setting LED 2
LCD display
Color
Solid/Flashing
Green
Solid On
Green
Solid On
Green
Solid On
Solid On
Green
Flashing
Output powered by utility
Output powered by PV
Output powered by battery
Output is available in line mode
Output is powered by battery in battery mode
14
Status indicators
Function keys
On/off switch
Messages
Advertisement
Table of Contents
