Table of Contents
Advertisement
Maximum
current
41
(only for Parallel model)
On/Off control for RGB LED
*It's necessary to enable
51
this setting to activate RGB
LED lighting function.
52
Brightness of RGB LED
53
Lighting speed of RGB LED
Disable (Default)
30A
discharging
150A
Enabled (default)
Low
High
Low
28
If selected, the maximum
discharge current limits protection
is disabled. It will be protected by
overload.
The setting range is from 30 A to
150 A. Increment of each click is
10A.
Setting to limit maximum
discharge current. If more current
is required, the inverter will
by-pass (like overload by-pass) or
if no AC source is available then
shut down for 5 minutes.
Disable
Normal (default)
Normal (default)
Advertisement
Table of Contents
