Press "
staring time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press "
" button to exit the Setup Mode.
LCD Display
The LCD display information will be switched in turn by pressing the "UP" or "DOWN" button. The selectable
information is switched as the following table in order.
Selectable information
Input voltage/Output voltage
(Default Display Screen)
Input frequency
PV voltage
" button to set up Solar Only Timer. Press "
" or "
" button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button to select
" or "
LCD display
Input Voltage=230V, output voltage=230V
Input frequency=50Hz
PV voltage=260V
PV1 voltage=260V (dual input model)
PV2 voltage=260V (dual input model)
33
" to
" button to