MPP Solar PIP3624MAX User Manual page 27

Beeps while primary source
22
is interrupted
Overload bypass:
When enabled, the unit will
23 transfer to line mode if
overload occurs in battery
mode.
25 Record Fault code
Bulk charging voltage
26
(C.V voltage)
27 Floating charging voltage
Alarm on (default)
Bypass disable (default)
Record enable (default)
PIP3624MAX model default:
28.2V
If self-defined is selected in program 5, this program can be set
up. Setting range is from 25.0V to 31.0V for PIP3624MAX model
and 48.0V to 62.0V for PIP7248MAX model. Increment of each
click is 0.1V.
PIP3624MAX model default:
27.0V
If self-defined is selected in program 5, this program can be set
up. Setting range is from 25.0V to 31.0V for PIP3624MAX model
and 48.0V to 62.0V for PIP7248MAX model. Increment of each
click is 0.1V.
25
Alarm off
Bypass enable
Record disable
PIP7248MAX model default: 56.4V
PIP7248MAX model default: 54.0V