Operation; Power On/Off; Operation And Display Panel - MPP Solar HV V2 6048-T User Manual

OPERATION

Power ON/OFF

Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
(located on the bottom of the case) to turn on the unit.

Operation and Display Panel

The operation and display panel, shown in below chart, is on the front panel of the inverter. It includes
three indicators, four function keys and a LCD display, indicating the operating status and input/output
power information.
LED Indicator
LED Indicator
Function Keys
Function Key
ESC
UP
DOWN
ENTER
Solid On
Green
Flashing
Solid On Battery is fully charged.
Green
Flashing Battery is charging.
Solid On
Red
Flashing
Description
To exit setting mode
To go to previous selection
To go to next selection
To confirm the selection in setting mode or enter setting mode
Messages
Output is powered by utility in Line mode.
Output is powered by battery or PV in battery mode.
Fault occurs in the inverter.
Warning condition occurs in the inverter.
9
LCD display
LED indicators
Function keys