Changing The Handsfree/Earpiece Volume; Setting Ringers - Swisscom Aton CLT 615 ISDN User Manual

Selection:
Select screensaver with r Or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and
§OK§
press
§Save§
Press the display key.
The screensaver is activated approx. 10 sec-
onds after the display has changed to idle
status.
If the screensaver conceals the display,
briefly press end key T to show the idle
display.
Setting the brightness and time
control for the display backlight
You can set the brightness of the display on
your desktop phone and specify a timeframe
during which the display is completely deac-
tivated e.g., at night.
If the display backlight is deactivated, it can
be reactivated by pressing any key or by an
incoming call. The display backlight is deac-
tivated again after approx. 30 seconds after
the last press of a key.
¢ ¢
Ï
v
Display
The current setting is displayed.
¤
You can enter data in the following fields:
Time Control
Prerequisite: The date and time have
already been set.
Select On or Off.
The following fields are displayed when
Time Control = On.
Display off from:
Enter the time in 4-digit format when the
backlight should be deactivated in idle
mode.
Display off until:
Enter the time in 4-digit format when the
backlight should be reactivated.
.
¢
Backlight
Setting the desktop phone
Brightness:
Set the brightness of the display back-
light with r.
You can select from five brightness levels
(1 = low – 5 = very bright; e.g., brightness
level 3 = Š).
¤
Press the display key
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
Setting the volume in idle status
¢ Ï ¢
v
Audio Settings
¢
Call Volume
You will hear a test tone.
r
Set the earpiece volume.
s
Scroll to the Speaker line.
r
Set the handsfree volume.
§Save§
Press the display key to save
the setting.
Setting the volume during a call
You can adjust the volume during a call
using the R and S keys. Each time
you press the key, the volume will increase or
decrease by one level.
§Save§
Press the display key if neces-
sary to save the setting perma-
nently.

Setting ringers

Setting the volume
You can choose between five volumes (1–5;
e.g., volume 3 = Š) and the "crescendo"
ringer (6; volume increases with each ring =
‡).
You can set different volumes for the follow-
ing functions:
u
Internal calls and appointments
¢
(Appointments
§Save§
.
page 76)
89