Swisscom Aton CLT 615 ISDN User Manual page 86

Deregistering Bluetooth devices
¢
s (select entry)
Open list
§Options§
Press the display key.
Delete Entry
Select and press
Bluetooth is activated, if neces-
sary.
Please note
If you deregister an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
Renaming a Bluetooth device
¢
s (select entry)
Open list
§Options§
Press the display key.
Rename Select and press
is activated, if necessary.
~
Change the name.
§Save§
Press the display key.
Rejecting/accepting an
unregistered Bluetooth device
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the desktop phone, you are prompted
on the display to enter the PIN for the Blue-
tooth device (bonding).
u
Reject
T
Briefly press the end key.
§OK§
.
§OK§
. Bluetooth
Connecting/using other devices
u
Accept
~
Enter the PIN for the Bluetooth
device you want to accept and
§OK§
press
If you have accepted the device, you can
use it temporarily (i.e., as long as it is
within receiving range) or save it to the
list of known devices.
Once the PIN has been confirmed, save to
the list of known devices:
§Yes§
– Press the display key.
§No§
– Press the display key to use the
device temporarily.
Please note
If you only accept the registration of a
headset on a temporary basis, the head-
set is not deleted from the known
devices list.
Changing the Bluetooth name of
the desktop phone
You can change the desktop phone name
used to identify it on the display of another
Bluetooth device.
¢ ¢
v ò Bluetooth
§Change§
Press the display key. Bluetooth
is activated, if necessary.
~
Change the name.
§Save§
Press the display key.
.
Own Device
85