Connecting/Using Other Devices; Registering Handsets - Swisscom Aton CLT 615 ISDN User Manual

Connecting/using other
devices
You can upgrade your desktop phone to a
"PABX" by connecting other communication
devices.
You can register up to six handsets and
six repeaters to your desktop phone.
Each registered device is assigned an inter-
nal number (2–7) and an internal name
(INT 2–INT 7). The number assignment and
names can be changed.
If all internal numbers have already been
assigned on your desktop phone, you must
deregister a handset that is no longer
required before registering a new one.
You can also connect an analogue fax
¢
machine ( page 86
two Bluetooth devices (a headset and a data
¢
device, page 83) to the desktop phone.

Registering handsets

You can register up to six handsets and six
repeaters to your desktop phone.
You must register a handset on the desktop
phone (1) and on the handset itself (2).
1. On the desktop phone:
To set the desktop phone to registration
mode:
¢ Ï ¢
v
Registration
¢
Register Handset
The desktop phone's DECT interface is
(assuming it is deactivated) automatically
activated as soon the desktop phone is set
to registration mode.
You can register the handset as long as the
display on the desktop phone shows the
message Please register your handset.
¢
and page 98) and

Connecting/using other devices

2. On the handset:
Within approx. 60 secs.
¤
Start the registration procedure on the
handset in accordance with the hand-
set's operating instructions.
~
If required, enter the system
PIN for the desktop phone
(default: 0000) and press
After registering successfully
Handset registered is shown on the desktop
phone's display.
Please note
If six handsets are already registered to the
desktop phone (the internal numbers 2–7
are already assigned), you have two
options:
u
The handset assigned the internal
number 7 is in idle status:
The handset that previously had the
number 7 is deregistered; the new hand-
set is registered and is assigned the
internal number 7.
u
The handset assigned the internal
number 7 is in use:
The handset to be registered cannot be
registered. A message to this effect is
displayed on the handset.
Assigning send and receive
connections to the handset
If several MSNs are configured on the desk-
top phone, the connection wizard for the
handset is started, enabling you to assign
send and receive connections to this hand-
set. For the connection wizard procedure,
please see page 18.
Assigning the internal number
The desktop phone assigns the lowest free
internal number to the handset (possible
numbers: 2–7). The internal number is
shown on the handset display e.g., INT 2.
This means that the handset has been
assigned the internal number 2. The desktop
phone is assigned the internal number 1.
§OK§
.
79