Installing The Desktop Phone - Swisscom Aton CLT 615 ISDN User Manual

Firmware updates
This user guide describes the functions of your desktop phone from firmware
version 30.00.
Whenever there are new or improved functions for your Aton, firmware updates
are made available for you to download to your desktop phone
If this results in operational changes to your desktop phone, a new version of
this user guide or the necessary amendments are published on the Internet at
www.swisscom.ch.
Select the product to open the relevant product page for your desktop phone
where you will find a link to the user guide.
To find out what version of firmware is currently loaded

Installing the desktop phone

The desktop phone is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤
Set up the desktop phone at a central point in the building.
If you wish to operate handsets from your desktop phone, consider the range of
the desktop phone. This is up to 250 m in unobstructed outdoor areas and up
to 40 m inside buildings. The range is reduced when eco mode is activated
¢
( page
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
u
Never expose the telephone to any of the following: Heat sources, direct sun-
light or other electrical appliances.
u
Protect your Aton from moisture, dust, corrosive liquids and fumes.
Please note
75).
Warning
Taking the first steps
¢
( page 96).
¢
( page 104).
9