Table of Contents
Advertisement
Set up, install, and configure
Networking
Connecting the printer to a Wi-Fi network
Note: This feature is available only in some printer models.
Before you begin, make sure that:
Active Adapter is set to Auto. From the control panel, navigate to:
•
Settings > Network/Ports > Network Overview > Active Adapter
Press
to navigate through the settings.
•
The Ethernet cable is not connected to the printer.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Setup On Printer Panel
Press
to navigate through the settings.
2
Select a Wi-Fi network, and then type the network password.
Note: For Wi-Fi-network-ready printer models, a prompt to set up the Wi-Fi network appears during initial
setup.
Connecting the printer to a wireless network using Wi-Fi Protected Setup
(WPS)
Note: This feature is available only in some printer models.
Before you begin, make sure that:
The access point (wireless router) is WPS-certified or WPS-compatible. For more information, see the
•
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
Active Adapter is set to Auto. From the control panel, navigate to:
•
Settings > Network/Ports > Network Overview > Active Adapter
Press
to navigate through the settings.
Using the Push Button method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi-Fi Protected Setup > Start Push Button Method
Press
to navigate through the settings.
2
Follow the instructions on the display.
28
Hide quick links:
Advertisement
Table of Contents
