Adjusting The Tray Registration - Ricoh Aficio CL5000 Maintenance Manual

Adjusting the Tray Registration

You can adjust the registration of
each tray. The vertical adjustment is
used for all trays. Normally, you need
not update the registration. But when
the optional Paper Feed Unit or the
Duplex Unit is installed, updating the
registration is useful in some cases.
The following procedure describes
how to adjust the registration of Tray
1. You can use the same procedure to
adjust the other tray as well.
A A A A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
Power Error
"Menu" appears on the panel dis-
play.
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter #} } } } .
Menu:
Maintenance
C C C C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Reg-
istration", and then press { { { { Enter
#} } } } .
Maintenance:
Registration
D D D D
Escape
#
Enter
Data In
E E E E
ZDJS001N
Adjusting the Tray Registration
Print the test sheet to preview the
settings.
A Confirm that "Prt. Test Sheet"
is displayed, and then press
{ { { { Enter #} } } } .
Registration:
Prt. Test Sheet
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
tray to adjust, and then press
{ { { { Enter #} } } } .
Prt. Test Sheet:
Tray 1
The test sheet is printed shortly,
and then the printer returns to
the previous menu.
Confirm the position of the image
on the test sheet, and then adjust
the registration value.
The following steps show how to
adjust the registration value for
making the margins to be equal.
3
61