Appendix
C Removing the 4-bin Mailbox
Remove the four paper output trays. Open the Bypass Tray and the Duplex
Unit. Then open the right covers of the printer and the Interchange Unit.
Remove the three screws that are fastening the printer and the 4-bin Mail-
box.
Press the two levers shown in the illustration to release the lock.
4
Hold the 4-bin Mailbox with both hands, and then slowly pull it out of the
printer.
Important
❒ Remove all the cables beforehand.
❒ Be careful not to damage the printer while moving it.
C C C C
Be sure to close the Bypass Tray and the front cover.
D D D D
Pull out the handles from the sides of the printer.
Note
❒ Pull out the handles all the way until they stop.
E E E E
Lift the printer with two people by holding the handles, and then move it
horizontally to the place where you want to install it.
70
ZESP313J
ZESP006J