Fuser Oil Type 5000 - Ricoh Aficio CL5000 Maintenance Manual

Replacing Consumables and Maintenance Kit

Fuser Oil Type 5000

R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating "v"
(means hot surface). Touching
2
"v" (means hot surface) could
result in a burn.
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about 30 minutes. After that,
install the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
• Do not pull out the fusing unit
forcefully. It may cause the unit
to fall and result in an injury.
• When touching the fusing unit,
do not touch any areas other
than the handle as it may cause
a burn.
Replace the fuser oil unit when the
following message appears on the
panel display.
Replace
Fuser Oil Unit
Check the contents of the box for the
following items:
❖ ❖ ❖ ❖ Fuser Oil Unit
22
❖ ❖ ❖ ❖ Gloves
❖ ❖ ❖ ❖ Disposal Bag
❖ ❖ ❖ ❖ Maintenance Guide
A A A A
Turn off the printer power.
Important
❒ To prevent a burn, be sure to
wait about 30 minutes after the
power is turned off until the
fusing unit cools down before
touching the fusing unit.
B B B B
Open the front cover slowly by
pulling down from the two areas
on the left and right.
ZESH400J