Ricoh Aficio CL5000 Maintenance Manual page 36

Replacing Consumables and Maintenance Kit
D D D D
Press { { { { Enter #} } } } .
Print out the sheet for checking the
color condition.
Printing...
2
KCMY
1. Check that all colors are printed on the Test Sheet with no line breaks in them.
2. Reset the Development Unit(s) for colors where line breaks have occurred.
3. Repeat the Devp. Unit Check test print, then check the sheet again.
E E E E
Use the sheet to check the print
quality of each color.
If the printed sheet has no broken
or blurred colors, the development
units are installed properly. If this
is not the case, reset the Develop-
ment Unit(s) by the following pro-
cedure.
F F F F
Open the left cover of the printer
by pulling the fasteners (A A A A → → → → B B B B ).
Note
❒ The two round fasteners cannot
be detached.
32
Development Unit Test Print
Print Quality Sample
Color-01
ZESH409J
From the top, the development
units are installed in the order of
black, yellow, cyan, and magenta.
YMCK
G G G G
Detach the connectors from the
development units from the top
to the bottom by pressing the
sides of the connectors.
ZESH403J
ZESH410J