Ricoh Aficio CL5000 Maintenance Manual page 30

Replacing Consumables and Maintenance Kit
Q Q Q Q
If the Duplex Unit is installed,
close it.
2
R R R R
Close the Bypass Tray.
S S S S
Close the front cover slowly by
pushing the two areas on the left
and right.
T T T T
Turn on the power switch.
Note
❒ If you hear a noise while print-
ing after replacing the fuser oil
unit, the seals A and B may not
have been removed. Go back to
A
step
are removed.
26
to confirm that the seals
U U U U
Perform the maintenance reset.
When "Replace Fuser Oil Unit"
appears on the panel display
A Press and hold { { { { Escape} } } } for
over five seconds. The message
disappears and maintenance
reset start automatically.
Replace
Fuser Oil Unit
ZESH405J
When "Replace Fuser Oil Unit
soon" appears on the panel display
A Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
ZESH406J
"Menu" appears on the panel
display.
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to show
"Maintenance" on the panel
display, and then press { { { { Enter
#} } } } .
Menu:
Maintenance
"Maintenance" appears on the
panel display.
Escape
#
Enter
Power Error Data In
ZDJS001N